2.
After installation, activate your software. Click on " L icence " button, then write
in your 8 character long code given by your distributor. (In case you bought
only the software, you will receive it in an e-mail, otherwise the code is found
in the product box.)
3.
After entering the code, the " L icence " button on the main window will change
to " S tart " button and you will be able to use the software without any
restrictions.
Software Updates
Software updates are available on this link: machineryguideapp.com/en/releases.
Installing a software update is very similar to the installation of the original software,
the main difference is that Activation is not required this time.
In case of a new release, each user will be notified via e-mail. (The e-mail will be sent
to the e-mail address that was assigned to the registration).
11