Philips VE8 Service Manual page 119

EN 120 8. Q529.1A LA
Table 8-2 Tint settings
Colour Temp.
Cool
Normal
Warm
8.4 Option Settings
8.4.1 Introduction
The microprocessor communicates with a large number of I
ICs in the set. To ensure good communication and to make
8.4.2 Dealer Options
For dealer options, in SAM select "Dealer options" and then
"Personal options".
Table 8-3 Dealer options
Menu item Subjects
Personal Options Picture Mute
Virgin Mode
8.4.3 (Service) Options
Select the sub menu's to set the initialization codes (options) of
the set via text menus.
Table 8-4 Service options
Menu-item Subjects
PIP/DS Dual Screen
Display Screen
Dimming Backlight
Video Repro Perfect Pixel
Ambient Light
Ambient Light technology
Ambient Light driver
MOP
Light sensor
Light sensor type
Source selection HDMI 3
HDMI CEC
Audio Repro Acoustic System (Cabinet design,
used for setting dynamic audio
parameters)
Miscellaneous Tuner Type
Nyquist SAW filter
2
I C configuration
Upgrade assistant
Opt. no. Group 1
Group 2
Store
Alignments
R G
113 119 123
124 117 115
127 105
Options
On
Off
On
Off
Options
None
One tuner dual screen
Two tuner dual screen
"Value"
On / Off
On / Off
Off / Mono / Stereo/Triple / Quad
CCFL / LED
Pacific 3 / MOP / DFI
Present / Not present
Present / Not present
Step / ME7 / MS7 / ME8 / Canvas / Aurea Styling
Present / Not present
On / Off
None
Top A 2k8
MS7 model A 2k8
MS7 model B 2k8
ME7 32" 2k8
ME7 model A 2k8
ME7 model B 2k8
Step 63 Combat Coscone 2k8
Aurea
ME8
TD1736 / TD1716
On / Off
with PCA9540 / with PCA9515 /
via channel decoder
Present / Not present
Store
digital diagnosis possible, the microprocessor has to know
which ICs to address. The presence / absence of these specific
ICs (or functions) is made known by the option codes.
B
Notes:
• After changing the option(s), save them by pressing the OK
77
button on the RC before the cursor is moved to the left,
select STORE in the SAM root menu and press OK on the
RC.
• The new option setting is only active after the TV is
switched "off" / "stand-by" and "on" again with the Mains
switch (the NVM is then read again).
2
C
Description
Picture is muted / not muted in case no input signal is detected at input connectors
TV starts up / does not start up (once) with a language selection menu after the Mains switch is turned "on" for the
first time (virgin mode)
Description
No DS
One tuner DS
Two tuner DS
Used screen size, type, and resolution (see table "Option code overview" in this
chapter)
Feature present / not present
Perfect Pixel On / Off
Inverter not present / one inverter / two inverters / three inverters / four inverters
CCFL / LED
Ambient Light driver
MOP present / not present
MOP present / not present
HDMI 3 Present / Not present
HDMI CEC On/ Off
TD1736 = US, TD1716 = Europe
SAW filter on/off
xxxxx xxxxx xxxxx xxxxx (see set sticker)
xxxxx xxxxx xxxxx xxxxx (see set sticker)