Advertisement
FOXTECH FALCON BRUSHLESS GIMBAL OPERATION MANUAL
A. Gimbal Balance
It's
pendulum effect
stop at any position, whether tilt or roll.
1. Mount camera on the gimbal and turn off gimbal power.
2. Wiring cables to get rid off jamming.
3. Adjust camera mount plate/roll clamp/tilt joint screws, ensure gimbal completed
balance.
4. Move and rock gimbal, the gimbal will keep its attitude without change, if not,
please repeat step2 to step3.
to balance the Falcon brushless gimbal. Please notice gimbal
Doesn't mean
balance, true balance likes a seesaw, the gimbal can
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Foxtech Falcon
Summary of Contents for Foxtech Falcon
- Page 1 FOXTECH FALCON BRUSHLESS GIMBAL OPERATION MANUAL A. Gimbal Balance It’s VERY IMPORTANT to balance the Falcon brushless gimbal. Please notice gimbal pendulum effect Doesn’t mean balance, true balance likes a seesaw, the gimbal can stop at any position, whether tilt or roll.
- Page 3 B. Gimbal Controller Connection C. Assistant Setup 1. Assistant download: http://www.foxtechfpv.com/foxtech-falcon-brushless-gimbal-p-1058.html The optimum parameters for SONY N5/N7 as shown above.
- Page 4 Vibration comes from aircraft frame will cause gimbal works abnormally, even self- oscillation and tumble. Please adjust your aircraft carefully, get rid off vibration, rock etc, and we strongly recommend mount Falcon Gimbal on a decent Foxtech OP Damper Plate to ensure best work conditions.
- Page 5 Direction.Default, DON’T CHANGE. POLES: Brushless motor poles, automatic identify or manual entry.(Most brushless motor has 14 poles). After doing the above steps you should have a perfectly working Falcon gimbal. Have fun. VERY IMPORTANT: DON’T CHANGE OTHER PARAMETERS RANDOMLY, IT WILL DAMAGE GIMBAL! Version:1.1...
Need help?
Do you have a question about the Falcon and is the answer not in the manual?
Questions and answers