Remote Control; Function; Setup Items - Sony VPL-FX52 Protocol Manual

3-1-2. Remote Control

The remote control service is provided that can control the target equipment from remote location via
network. The SDCP protocol that serves to acquire the basic information such as equipment name and
serial numbers is installed in this projector.

3-1-2-1. Function

This responds to the control command and requests for acquiring the status and information supplied
from clients.
Control request
Enables the input to be selected and picture control to be adjusted.
SIRCS request
Enables remote control by sending the SIRCS code.
Status request
Enables equipment status information such as power status, error information and power-on time to be
acquired.
Information request
Enables equipment information such as equipment name, serial number and installation information to be
acquired.
Protocol
Item
Protocol name
Transport
Port number
TCP connection timeout

3-1-2-2. Setup Items

The items that can be set for the remote control service are described below.
Setup item Description
Port Port number
Timeout TCP connection timeout time
VPL-CX61/CX63/CX75/CX76/CX80/CX85/CX86/FE40/FE40L/FX40/FX40L/FX51/FX52/FX52L/PX35/PX40/PX41
Description
SDCP (Simple Display Control Protocol)
TCP
53484
30 seconds
7