How Do I Connect The Vg-99 To My System - Roland V-Guitar System VG-99 Q&A

®
®ÂØÒňÎ
V G -99
H D I C
ow o onneCt tHe
1 Confirm that the power is off on the VG-99.
2 Connect one end of the 13-pin cable to the GK pickup.
3 Connect the other end of the 13-pin cable to the GK IN jack on the VG-99.
4 With a standard guitar or instrument cable, connect the L(MONO) MAIN OUTPUT on the VG-99 to the input of
your amp, mixer, or PA. If you prefer, connect your headphones to the VG-99's PHONES output.
Note: No modeling sound is produced at the GUITAR OUT on the VG-99. Use the GUITAR OUT to send your dry
guitar signal to a different amp if desired.
5 Now turn on the VG-99 and your amp.

How Do I Connect the VG-99 to My System?

VG-99 M S
to y ySteM
?
2