Sony VPL-CX11 Operating Instructions Manual page 17

To connect an IBM PC/AT compatible computer
When you use a USB mouse and USB equipment
Rear side
CONTROL S VIDEO IN
IN / PLUG IN
POWER
to USB equipment
USB cable A type – B type (supplied)
On the USB function
When connecting the projector to a computer by using the USB cable for the
first time, the computer recognizes the following devices automatically.
1 USB hub (general use)
2 USB human interface device (wireless mouse function)
3 USB human interface device (projector control function)
The computer also recognizes the device connected to the downstream
connector on the projector.
Recommended operating environment
When you use the USB function, connect your computer as illustrated above.
This application software and the USB function can be used on a computer
loaded with Windows 98, Windows 98 SE, Windows 2000 or Windows ME
preinstall models.
Notes
• As the projector recognizes the USB mouse when the computer is
connected to the USB connector, do not connect anything to the PS/2
mouse port.
• Your computer may not start correctly when connected to the projector
via the USB cable. In this case, disconnect the USB cable, restart the
computer, then connect the computer to the projector using the USB
cable.
• This projector is not guaranteed for suspend, standby mode. When you
use the projector in suspend, standby mode, disconnect the projector
from the USB port on the computer.
• Operations are not guaranteed for all the recommended computer
environments.
INPUT A
INPUT A
HD D-sub
15-pin cable
(supplied)
Stereo audio connecting
cable (not supplied)
Computer
to monitor output
to audio output
to USB connector
Connecting the Projector
17 GB