4
Press the ENTER key.
The setting menu display appears.
Network
Internet Protocol(IP)
Manual Mode1
Simple Mode
IP Address Setting:
Manual Mode2
IP Address:
Manual Mode3
Subnet Mask:
Manual Mode4
Default Gateway:
Manual Mode5
System Setup
Exit
5
Select [Setup] to set network setting
items.
Note
To use the network function, set [Standby
Mode] in the Function menu of the projector to
[Standard].
Projector Setting Items
When the ENTER key is pressed in the home
display of the network presentation, the
initial display of the setting menu appears. In
the initial display, you can switch the mode
to be used and change each mode settings.
Network
Internet Protocol(IP)
Manual Mode1
Simple Mode
IP Address Setting:
Manual Mode2
IP Address:
Manual Mode3
Subnet Mask:
Manual Mode4
Default Gateway:
Manual Mode5
System Setup
Exit
Using the software keyboard
When inputting characters or numbers, the
software keyboard is displayed.
1
Select a character with the v/V/B/b
buttons and then press the ENTER
key.
The selected character is displayed at the
cursor position in the display column.
8
Preparation
2
3
Manual
192.168.11.21
255.255.255.0
192.168.11.253
To delete the character locating one
space before the cursor
S
press the ENTER key.
To redo the input from the beginning
S
and press the ENTER key.
All the input characters are deleted.
To enter a space
S
press the ENTER key.
Manual
192.168.11.21
255.255.255.0
192.168.11.253
Repeat step 1 to input characters.
After you input the rest of the
characters, select [OK] with v/V/B/
b button and press the ENTER key.
Input characters are entered and the
software keyboard is closed.
elect [Delete] with v/V/B/b button and
elect [All Clear] with v/V/B/ b button
elect [Space] with v/V/B/b button and