Banner RSD1QP Quick Start Manual

RSD1 Remote Display

Quick Start Guide

Remote Display and Configuration Tool
To view or download the latest technical information about this product, including specifications, dimensions, accessories, and
wiring, see www.bannerengineering.com
sensor, reference the sensor specific literature.
Models
Model Output A and B
RSD1QP Configurable
Overview
The RSD1 remote display is designed to provide easy sensor configuration and monitoring with the ability to copy settings between
sensors.
Features and Indicators
Output A
LED Indicator
Power
LED Indicator
Output B
LED Indicator
Figure 1. RSD1 Display Features
RSD1 Buttons
Use the RSD1 buttons Down, Up, Enter, and Escape to view or change RSD1 settings and information and to program a
connected sensor.
Down and Up Buttons
Press Down and Up to:
• Navigate the menu systems
• Change programming settings
When navigating the menu systems, the menu items loop.
Press Down and Up to change setting values. Press and hold the buttons to cycle through numeric values. After
changing a setting value, the value slowly flashes until the change is saved using the Enter button.
Original Document
199622 Rev. B
. Search 199621 to view the Instruction Manual. To check RSD1 compatibility with a
•
•
•
•
•
Integral 150 mm (6 in) PVC cable with 5-pin M12/Euro-style quick disconnect
Display
Push Buttons
4 September 2018
Allows for configuration of remote sensor heads
Easy to set up and use with a 2-line, 8-character display
Ability to display live distance measurement
Ability to save up to 6 unique configurations
Not required for continuous operation of configured sensor(s)
Connection
Three LED indicators on the RSD1 provide ongoing
indication of the connected sensor status.
Output A LED Indicator
Solid Amber = Output A On
Off = Output A Off
Power LED Indicator
Solid Green = Normal Operation, Power On
Output B LED Indicator
Solid Amber = Output B On
Off = Output B Off
199622