Before First Use; Important Notes - Salton Cordless HOTRAY TWT40 Instruction Booklet

14.This appliance is for Household Use Only. Do not use appliance for

other than its intended use.

15.Do not leave unit unattended while in use.

SAVE THESE INSTRUCTIONS

HOUSEHOLD USE ONLY

GROUNDED PLUG

To reduce the risk of electric shock this appliance has a grounded plug.

(2 blades and 1 pin) If the plug does not ﬁ t fully into the electrical outlet

contact a qualiﬁ ed electrician. Do not modify the plug in any way or use

an adaptor.

BEFORE FIRST USE

Wipe the surface of the Hotray® with a damp cloth; dry thoroughly.

HOW TO USE

1. Connect the power cord to the Warming Tray and then plug into a 120

volt A.C. outlet.

2. The Hotray® will take approximately 8 minutes to reach the

maximum temperature. After 8 minutes the Hotray® can be left

plugged in or unplugged from the wall outlet. If it is plugged into the

outlet, the thermostat will cycle on and off automatically to protect

against overheating. If unplugged the Hotray® will continue to

give off heat for approximately 60 minutes.

3. The red 'power' indicator light will remain 'On' as long as the Hotray®

is plugged in. The green 'ready' light will come on when the tray has

preheated. If the unit is left plugged in, the green light will cycle on

and off as the unit maintains the correct temperature.

•

Never put food directly on the Hotray, use cookware, casseroles or

serving dishes.

•

Porcelain and china dishes may cause scratches. Place dishes

carefully on stainless steel heating surface so they do not scratch.

TWT40_2016_Booklet_ENG.indd 3

7/12/16 9:12 PM

Table of Contents