WEPA TopiTec Automatic Operating Manual page 33

CL E ANI N G A N d CAR E IN sTRUCTIO N s
The TOPITEC ® AUTOMATIC has been designed specifically for use in pharmacies
and is manufactured at our own production plants. Our technical expertise and
experience enable us to offer you reliable high-tech equipment.
To ensure trouble-free operation over its service life, strictly
adhere to our instructions for cleaning, maintenance and operation.
Protect the device against mechanical impact!
Do not drop the device or any of its accessories. When moving the device on the work top,
ensure that no electronic or mechanical components are damaged.
Protect against dust!
Install and store the system and its accessories in a
dust-free environment, as fine particles could damage moving parts!
Protect the device against high temperature!
Do not install or store the system or its accessories in a room where they are exposed
to high temperatures. High temperature could damage electronic components,
or lead to the deformation or melting of certain plastic parts.
Protect against extreme temperature changes!
Do not install or store the system or its accessories in a room where they are exposed to very low
temperatures. As, during operation, the electronic devices are heated to operating temperature,
there is a risk of condensation inside the housing, which could damage electronic components.
Cleaning of housing and base
Do not use pointed implements or aggressive detergents. Clean the housing and the base with
a damp, soft cloth and a mild soapy solution. Alternatively, use an alcohol/water mixture.
Before cleaning the device, disconnect the power plug from the socket!
Cleaning of TOPITEC AUTOMATIC tool shaft
®
Always clean the tool shaft immediately after use with a cellulose cloth. Subsequently
soak it in approx. 30 ml of alcohol/water solution in the supplied shaft cleaning vessel.
Recommended product: MELISEPTOL to dissolve any deposits. Never clean the
®
TOPITEC ® AUTOMATIC tool shaft with washing-up liquid or in the dishwasher! The POM
insert of the tool shaft cleaning vessel can however be cleaned in the dishwasher.
33