Comestero Group Eurokey NEXT Quick Manual page 4

Eurokey NEXT – Quick Guide
This machine is equipe with safety devices in order to prevent damage due to short
circuits and fire.
These devices must not be bypassed, removed or disable for any
reasons., If the devices must be disabled to carry out maintenance or
servicing, operate on the appliance only when the power supply has
been switched off.
The safety devices have been constructed in compliance with existing
regulations. We recommend the operator to periodically check their
correct operation.
Risks deriving from using the machine
If maintained in good operating conditions and installed correctly (according to the
instructions of this manual), the machine does not pose any danger for the operator.
Electrical hazards: direct contacts during connection to the main
power supply. Operations carried out by a qualified technician.
Hazards during machine installation and setup
Follow the machine installation instructions provided in this manual so that risks for
people and property are minimal.
Electrical hazards: direct contacts during connection to the main
power supply. Operations carried out by a qualified technician.
Caution:
Make sure that the distribution line is sized according to the intensity of the
o
current absorbed by the machine
Set up the grounding system before connecting the machine and its accessories.
o
Hazards during machine maintenance
Electrical hazards: direct contact with live parts within the electrical
cabinet. Operations carried out by a qualified technician.
Caution:
Service the machine only after the main power supply has been switched off.
o
26
SAFETY INFORMATION