8. Care and maintenance
All the maintenance operations performed on the device must be
completed while the device is unplugged from the power supply.
Follow the warnings carefully so that the machine is always in the best
operating conditions, preventing dangerous situations or situations
which would render the warranty null and void.
8.1 External maintenance and cleaning
Clean the exterior surface of the device: use a damp cloth with water or a mild
detergent solution. Do not use aggressive solvents, detergents or abrasive sponges
that could damage the machine. Do not immerge the device or expose it to direct
sprays of water or of other liquid of any nature. Periodically check the state of the
machine's surfaces paying special attention to the areas which, in normal operating
conditions or through malice, could be hazardous for the user. Consult
Comesterogroup for further information.
For any faults or malfunctioning please contact Comesterogroup after-
sales service at +39 02 95781111.
9. Technical Data
10.1 Technical Specifications
Dimensions (lxhxd) [mm]
Weight [g]
Operating temperature [°C]
Humidity (non-condensed) [%]
Storage temperature [°C]
Power supply [Vac]
Power supply [Vdc]
Max absorbed power [W]
55 x 75 x 77
90
-10 ÷ +50
85
-10 ÷ +60
18 ÷ 27
18 ÷ 40
3,2
EN
43