Silvercrest SHFR 1450 A1 Operating Instructions Manual page 13

–
Fill the cooking container
exceed the MAX marking in the cooking container
–
If required, sprinkle a suitable cooking oil evenly over the food. To do
this, use the measuring cup
the measuring cup
■ If you want to use the cooking grill
–
Remove the stirrer
container
–
Place the cooking grill
place the food on the cooking grill
–
Select the programme "Manual 3"
element only and not the stirring function.
5) Close the lid
6) Choose a suitable programme, as described in the section Before first use.
Press the ON/OFF button
temperature according to your needs:
–
Press the SET button
–
Use the arrow buttons ▲ ▼
–
Press the SET button
–
Use the arrow buttons ▲ ▼
NOTE
► The possible setting range for temperature and time varies depending on
the programme. See the table in the section Programmes.
7) Press the ON/OFF button
lights up orange during operation.
Depending on the programme, the heating elements, the stirrer
ventilation start working.
NOTE
► The upper heating element may switch off occasionally during use. This
means that the temperature required for the cooking processing has been
reached. After a short time, the heating element switches back on and
resumes heating.
8) When the programme is completed, you will hear ten beeps and the display
lights up blue. The appliance is back in standby mode. The ventilation in the
lid
│ GB │ IE │ NI │ CY
■ 10
(35 ml).
and the stand
.
.
; the time display flashes.
again and the temperature display
runs on for a while to cool down the appliance.
with the food you want to cook. Do not
and do not exceed the MAX marking on
:
(if present) from the cooking
centrally in the cooking container
.
: this uses the upper heating
to start immediately or adjust the time and
to set a suitable time.
to set a suitable temperature.
to start the cooking process. The display
.
and
flashes.
and
SHFR 1450 A1