Sony KP-53VGB Operating Instructions Manual page 17

Connecting a satellite receiver
(SAT) and a VCR
1 Connect the cable from the satellite
antenna to tbe satellite receiver.
2 Attach tbe coaxial cable from the
incoming cable connection or antenna to
VHF/UHF IN on the VCR.
3 Using a coaxial cable, connect VHF/UHF
OUT on tbe VCR to VHFiUHF on tbe
projection TV.
4 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the VCR.
5 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right).
* if your VCR is not equipped wilh S VIDEO, use a
VIDEO cable (yelIow) instead of the S VIDEO
cable,
• To view input from the satellite receiver or
VCR, select the video input which your
satellite receiver or VCR is connected to
by pressing TV/VIDEO on the remote
controh
$ V_OEO
Disconnect all power sources before making any connections.
{R_r of pr*_i_tion ?V}
3
Ye_'_5W_aV {not _appni_}