Table of Contents
Advertisement
(_) Using the Timer
Menu
fl
Timer
beyffght
$_vlngs:
On
C_rren
t Time
Timer
.....
._AM
M_e
_.
8elector
End
After setting the clock you can use the timer
to turn the projection
TV on and off.
For detailed
information
on using the remote
control to modify menu settings,
refer to
"Learning
Menu Selection"
on page 25.
To select the Timer
_
menu:
Dispb_y _
HigNght
(_) _
S_,,lect
Set daylight _v#lg
time before settb N the clock. At_y
loss of power will cause these setlSngs to be erased.
Daylight Savings
Spring: Select On to compensate
for Daylight Saving Time,
/t__,_#_
The current time automatically
moves ahead one hour.
_S_d_ _
_J,_
Fall: Select Off at the end of Daylight Saving Time,
The current time moves back one hour,
Current
Time
Timer
1 Press @,
then press ,1_ or t_ until the currant day
(Sun-Sat) is displayed,
and press (2/?.
2 Press .1_ or .I, until the currant hour (1-12) and
AMtPM is displayed,
and press @.
3 Press .1_ or .I, until the currant minute (00-59) is
displayed, and press @.
The clock has now started. Press MENU to exit.
1 Press .1_ or t_ until the desired day or range of days
(Every Sun-Sat, Every Mon-Fri, Sunday, Monday ....
Saturday, Every Sunday, _, Every Saturday) is
_
¢'_ _' _ .....
displayed, and press @.
2 Press ,1_ or ,I, until the time (hours and minutes) that
so_ _,<_,_
you want the projection TV to remain on is displayed,
_,..
_r_
_ _:_
and then press @.
3 Press ,1_ or ,I, to set the time duration (maximum of 6 hours) and press Q-),
4 Press ,1_ or ,I, to select the desired channel and press @.
The timer is now set, The TIMERISTAND
BY indicator on your projection TV
will be lit.
Press MENU to exit, To cancel your timer setting, press RESET while in the
Timer window. Performing
Auto Program will erase all Timer settings.
2_
Advertisement
Table of Contents
