Troubleshooting Guide; Maintenance Schedule - Parkside PGI 1200 A1 Operating And Safety Instructions, Translation Of Original Operating Manual

of waste electrical and electronic equipment. Improp-
er handling of waste equipment may have negative
consequences for the environment and human
health due to potentially hazardous substances that
are often contained in electrical and electronic equip-
ment. By properly disposing of this product, you are
also contributing to the effective use of natural re-
sources. You can obtain information on collection
points for waste equipment from your municipal ad-
ministration, public waste disposal authority, an au-
thorised body for the disposal of waste electrical and
electronic equipment or your waste disposal com-
pany.

13. Troubleshooting guide

Fault
Engine does not start
Generator has too little or no
voltage

14. Maintenance schedule

Cause
Automatic oil cut-out has not responded
Spark plug fouled
No fuel
electronic defective
Overcurrent circuit-breaker has trig-
gered
Air filter dirty
Environmental protection
Take any contaminated maintenance material and
operating materials to a collection point designated
for this purpose.
When disposing of residual fluids (oils and fuel), ob-
serve the corresponding environmental regulations.
We recommend taking all remaining operating mate-
rials to your local collection point in a suitable sealed
container. Do not pour the remaining operating ma-
terials into waste or on the ground.
Remedy
Check oil level, top up engine oil
Clean or replace spark plug
Refuel / habe the petrol cock checked
Contact your dealer
Actuate the circuitbreaker and reduce
the consumers
Clean or replace the filter
7
GB