Troubleshooting Guide - Parkside PSE 2800 A1 Operation And Safety Notes

Anleitung_4152415_HR_RO_BG_GR_SE:_
GB
10.

Troubleshooting guide

Fault
Engine does not start
Generator has too little or no
voltage
14
26.10.2011 16:37 Uhr
Cause
Automatic oil cut-out has not
responded
Spark plug fouled
No fuel
Controller or capacitor
defective
Overcurrent circuit-breaker has
triggered
Air filter dirty
Seite 14
Remedy
Check oil level, top up engine
oil
Clean or replace spark plug
(electrode spacing 0.6 mm)
Refuel / have the petrol cock
checked
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the filter