4K Diva – User Manual Table of content Diva Overview ............................5 Connecting Cables to Diva ........................6 Diva Power/Status OLED ........................... 7 Diva Menu/Toggle Button ......................... 8 Diva Info/Exit Button ..........................9 Diva Out1/Up Button ..........................10 Diva Out0/Down Button ......................... 11 Help on Jack connections ........................
Page 4
4K Diva – User Manual Highlight Audio Features: ........................107 Highlight Convenience Features: ......................108 Highlight HDCP Features: ........................109 Main Specifications ..........................110 Supported Audio/Video Signals ......................111 Technical Specifications ........................111 Certifications ............................112 Pro Tips ..............................113 Disclaimer: party and/or custom firmware providing extra features are not covered in this manual.
4K Diva – User Manual Diva Overview Team HDfury would like to thank you personally for purchasing the 4K Diva! This unique HDMI2.0b device supports up to 4 inputs for true full 4K60 4:4:4 600MHz 18Gbps bandwidth signals. It will allow you to solve any HDCP error, extract full HDMI audio from HDMI sources and ARC/eARC up to Atmos HBR over TrueHD from ARC and eARC TVs to feed older AVR and Matrix any SD/HD/FHD/UHD/HDR/DV or PC signals up to 600MHz.
4K Diva – User Manual Connecting Cables to Diva • HDMI/HDCP 1.x devices must be connected to 1080p SDR Downscale TX1 Output port. • Make sure that you are using 600MHz certified or tested HDMI 4K cable if you plan to set up a 4K60 4:4:4 8b/ 4K60 4:2:2 12b 600MHz/18Gbps link in your setup. •...
4K Diva – User Manual Diva Power/Status OLED The Diva OLED will turn ON when power supply is applied; Diva Logo will be displayed followed by a similar default infopage to the one represented below. [192.168.1.117]: Diva IP address will be displayed here if LAN CONTROL RJ45 output is connected to your LAN/WAN router/switcher.
4K Diva – User Manual Diva Menu/Toggle Button The 4K Diva offers 2 functions per push button. [MENU] Wake up from sleep/fade mode and/or Enter Diva OLED MENU. [TOGG] When you are in Diva OLED MENU, the TOGGLE button allows you to change and cycle any setting value.
4K Diva – User Manual Diva Info/Exit Button The 4K Diva offers 2 functions per push button. [INFO] Wake up from sleep/fade mode and/or Cycle OLED infopage: INFO > LAN INFO > HDR INFO > … [EXIT] When you are in Diva OLED MENU, the EXIT button allows you to exit OLED MENU. Note: You can also control and change settings with IR codes, through IP or RS232 for MAC/WIN/Linux or from the embedded Webserver for MAC/WIN/Linux PC or via Android/iOS smartphone/tablet or any web browser based device.
4K Diva – User Manual Diva Out1/Up Button The 4K Diva offers 2 functions per push button. [OUT1] Wake up from sleep/fade mode and/or set and switch active or inactive inputs for TX1 output. [UP] When you are in Diva OLED MENU, the UP button allows you to navigate upward. Diva OLED/OSD will report info for up to two active inputs in default Matrix mode.
4K Diva – User Manual Diva Out0/Down Button The 4K Diva offers 2 functions per push button. [OUT0] Wake up from sleep/fade mode and/or set and switch active or inactive inputs for TX0 HDMI output. [DOWN] When you are in Diva OLED MENU, the DOWN button allows you to navigate downward. Diva OLED/OSD will report info for up to two active inputs in default Matrix mode.
4K Diva – User Manual Help on Jack connections INPUT JACK INPUT IR LED CONTROL OUT For a direct WINDOW Connect to your Ledstrip kit for connection from For local Diva Central ambient light, visual music or video system controller. control.
4K Diva – User Manual Help on AUDIO/CEC/ARC/eARC connections CEC Master is always TX0 eARC LINK Diva can extract up to Atmos HBR over TrueHD from capable eARC TV connected at TX0 and output it via AUDIO OUT to feed any AVR input capable of decoding such format.
4K Diva – User Manual Help on Ledstrip Installation Always disconnect your TV from power supply during installation. Make sure your TV backpanel is clean from any dust. Start LEDstrip install at the bottom right of TV back panel and go up. Make sure each segment of the LEDstrip is perfectly centered with the display side where it is applied.
4K Diva – User Manual Help on LAG Tester installation Connect LAG tester to IR Sensor input (p.12) Enable LAG test mode via webserver Stick the LAG tester on the video boxed area. START THE TEST AND WAIT OSD RESULTS Note: LAG Tester cable can be extended using any earphone 2.5mm jack extender You can choose 3 different on screen locations to place...
4K Diva – User Manual Diva OLED Menu AUTOSWITCH AUTOSWITCH PRIORITY EDID MODE CUSTOM COPY TX1 COPY TX0 AUTOMIX FIXED Press MENU once to enter Diva OLED Menu. EDID TABLE Once you are in Diva OLED EDID 0 EDID 1 EDID 2 EDID 3 Menu press the same menu...
4K Diva – User Manual Accessing Diva Web Server It is mandatory for accessing Diva web server to have an Ethernet cable connected between LAN CONTROL RJ45 connector and your local router or switcher. By default Diva use DHCP to retrieve an assigned IP automatically. You can set static IP from the Diva webserver config page.
4K Diva – User Manual Diva Web Server Top section Immediately upon accessing the webserver you will end up on the default INFO page with the above top tier section displayed. From that top tier section you will be able to retrieve the following information (also displayed on Diva OLED default page and once you cycle info page with INFO button to reach LAN page info).
4K Diva – User Manual Diva Web Server INFO Section SOURCE: When available, Display active source name currently outputting thru TX0 or TX1 output. IN TX0/IN TX1: Display the source name original video signal going thru TX0 or TX1 output. VIDEO TX0/TX1: Display the real video signal (if any operation on it) going out thru TX0 or TX1 output.
4K Diva – User Manual Diva Web Server EDID Section [COPY TX0 SINK]: Use EDID from the device connected at TX0 output. [COPY TX1 SINK]: Use EDID from the device connected at TX1 output. [FIXED EDID]: Use a 4K60 4:2:0 8b 300MHz 2ch Audio EDID. [CUSTOM]: Define individual EDID for each input from a list of 10 custom and 90 predefined EDID.
4K Diva – User Manual List of Custom EDID available. User can select an EDID from all below EDID tables or force the creation of an Automix EDID with below options. [FIXED EDID with L/R stereo] This mode is a 4K60 4:2:0 8b 300MHz stereo EDID table. It can be used as a security EDID to ensure a picture in every setup/situation.
Page 25
4K Diva – User Manual [DV Remove]: Force the mixed EDID to present no support for Dolby Vision. [DV Limit 300MHz]: Force the mixed EDID to only present support for Dolby Vision at 300MHz. Selectable algorithms available in Automix mode: -Min Mixed Capabilities -Max Audio/Min Video -TX0 Output Priority...
4K Diva – User Manual Diva Web Server SCALER Section [No Scaling]: Set your unit to No Scaling for the signal to pass-through untouched [Custom Scaling]: Set your Diva unit to Custom Scaling to manually define the scaling parameters. You can select between various type of resolutions, color space and deep color settings for TX0 upscale output port.
4K Diva – User Manual Diva Web Server HDR/DV Section Disclaimer: party and/or custom firmware providing extra features are not covered in this manual.
Page 28
4K Diva – User Manual [CAPTURED HDR METADATA]: If the source at input is sending HDR InfoFrame metadata then the information is captured, extracted and displayed in this text box. HDR metadata is also deciphered and displayed in human readable format. [CUSTOM HDR METADATA GENERATOR]: This section will allow you to create your own custom HDR metadata and inject it on the current signal by adding it or replacing the existing HDR metadata.
Page 29
4K Diva – User Manual [White Point]: Select the white point value to be used in the custom HDR metadata creation. [Max Luminance]: Select the Max Luminance value to be used in the custom HDR metadata creation (valid from 1 to 65535) [MaxCLL]: Select the MaxCLL value to be used in the custom HDR metadata creation (valid from 1 to 65535) [Min Luminance]: Select the Min Luminance value to be used in the custom HDR metadata creation...
Page 30
4K Diva – User Manual [Send AVI]: Replaces the current incoming AVI with the custom defined one in the text box. This way customer can for example activate BT2020 mode in the TV even though content doesn't sent the correct InfoFrame.
4K Diva – User Manual Diva Web Server OSD Section [OSD SETUP]: Enable or Disable the OSD feature of Diva. [OSD FADE]: Set the timer in seconds before OSD fade out, 0 = never (always ON) [OSD LOCATION X, Y]: Set the X and Y value of the OSD location at 1080p, values are multiplied by 2 when the stream is 4K.
Page 32
4K Diva – User Manual [OSD INFO]: Select or unselect the information that must be displayed on your Diva OSD. Available options are: Source name, Video Field, Video IF, HDR info, HDR IF, Audio field, RX Video info, RX HDR info, Ignore Metadata Change.
4K Diva – User Manual Diva Web Server CEC/RS232 Section [ENABLE CEC] must be checked in order to apply the selected dropdown options to the Diva unit. Once activated it allows Diva to answer and process CEC requests and commands and appear on the TV CEC network map.
Page 34
4K Diva – User Manual [RS232 COMMAND]: Allow you to test RS232 command to make sure your unit is properly configured and ready to communicate via RS232. [RS232 BAUD RATE]: Set the RS232 link speed (default 19200) [Send Ascii]: Once RS232 command have been entered in Ascii format, use this button to send it out. [Send Binary]: Once RS232 command have been entered in HEX/Binary, use this button to send it out.
4K Diva – User Manual Diva Web Server MACROS Section With the help of power users from the community, special automatic and custom macro has been developed for JVC Projectors. Kindly please refer to instructions posted here. Diva now allow to edit each command individually so you can instruct any RS232 capable display.
4K Diva – User Manual Diva Web Server TOOLS Section Disclaimer: party and/or custom firmware providing extra features are not covered in this manual.
Page 37
4K Diva – User Manual [PROFILE]: Select the tone-mapping profile that works best for your display here. Most users should get best results using Profile 2; however some display might render better colors using slightly different profile. [ACTIVE VIDEO]: Select the LEDstrip light effect that must be applied when there is active video. Default is FOLLOW ACTIVE VIDEO but you might want to turn it OFF or select another effect from there at some point.
4K Diva – User Manual Diva Web Server CONFIG Section Disclaimer: party and/or custom firmware providing extra features are not covered in this manual.
Page 39
4K Diva – User Manual [AUTOSWITCH INPUTS]: When activated, the new TMDS / Pixel clock Auto switch feature will force the Diva unit to automatically switch to the active signal if the selected signal is lost. It can also auto switch source that keep sending +5V when in standby such as ATV4K, X1X, Shield and others.
Page 40
4K Diva – User Manual [IP PORT]: Set the IP/telnet port of your choice here (default value is 2210). [SET PORT]: Click here to apply the IP/telnet port of your choice (Reboot or Power cycle required) [REBOOT UNIT]: Click REBOOT button to restart Diva completely. [EXPORT CONFIG]: Allow you to export a txt file that include the full list of Diva settings and some setup information that can be useful for support.
4K Diva – User Manual Updating your Diva Firmware via web browser The Diva Firmware can be updated from any web browser based device. If you meet any issue updating your Diva firmware, please try using Chrome Browser on your device. You can download the latest Firmware version for your Diva device from the Download Tab on the Diva Product page: here.
Page 42
4K Diva – User Manual During this process you will see the above message on the footer page of the config section. Please wait a few seconds and do not disconnect your device while the upgrade process is running. Once completed, you will see the above notification. Simply wait for Diva OLED to come back on and click REFRESH.
4K Diva – User Manual CONFIG Export section of web server: By using the [CONFIG] > [EXPORT CONFIG] option, you will be able to save the current Diva configuration and settings in a text file. The file can then be shared with the community or for support reason. Exported config file will present the active signal information, the EDID set for each RX and TX as well as the list of parameters.
4K Diva – User Manual RS232 and IP/Telnet Command List DIVA RS232 AND IP/TELNET COMMAND LIST: Diva RS232 jack expects the following plug signals: TIP = TX [sends data out from Diva] RING = RX [receives data to Diva] SLEEVE = GND Parameters: 19200, n, 1, no handshake If using RS232, each command must start with #diva header and must end with a carriage return \r or a newline \n...
Page 49
4K Diva – User Manual #diva set inseltx1 x where x is [0-3] input port, or [4] for follow Ex. #diva set inseltx1 1 Set tx0 to input 1 and keep tx0 as is #diva set ipaddr xxx.xxx.xxx.xxx Sets the static IP address. Active when dhcp is turned off. Ex.
Page 50
4K Diva – User Manual Ex. #diva set edid audio native #diva set edid bt2020 x where x is [on / off] Sets the automix EDID bt2020 capability addition Will not remove if existing on the sink - only adds if missing Ex.
Page 51
4K Diva – User Manual #diva set edid 3dremove x where x is [on / off] Sets the automix EDID to remove 3D capability Controls if the source sees a 3D capable sink Ex. #diva set edid 3dremove on #diva set hdcp x where x is [14 / auto] Sets the hdcp level in auto mode, depending on sink capability uses hdcp 1.4 or 2.2...
Page 52
4K Diva – User Manual #diva set hdrcustom x where x is [on / off] Starts to output custom HDR metadata and ignores any input received HDR metadata. Overrides all other hdrcustom options Ex. #diva set hdrcustom on #diva set hdrcustomhdr10only x where x is [on / off] Starts to output custom HDR metadata if and only if the input is HDR10.
Page 53
4K Diva – User Manual #diva set avidisable x where x is [on / off] Stops sending any AVI infoframe content Ex. #diva set avidisable on #diva set cec x where x is [on / off] Sets the CEC engine Ex.
Page 54
4K Diva – User Manual 0 = no fade Ex. #diva set oledfade 60 #diva set osd x where x is [on / off] Enables / disables osd Ex. #diva set osd on #diva set osdloc x y where x is [1 - 1920] and y is [1 - 1080] Sets the OSD information location coordinates.
Page 55
#diva set osdtextstr x where x max 64 characters Defines the specific text string to be displayed. Must be in enlosed in quotation Ex. #diva set osdtextstr "HDFury 2019" #diva set osdtext x where x is [on / off] Enables / disables osdtext Ex.
Page 56
4K Diva – User Manual #diva set analogvolume x where x is [-30 to +10] Sets the analog L/R audio jack output volume in dB. Ex. #diva set analogvolume -10 #diva set analogbass x where x is [-10 to +10] Sets the analog L/R audio jack output bass level in dB.
Page 57
4K Diva – User Manual 2 = semiautomatic 3 = custom Sets the current JVC macro mode Ex. #diva set jvcmacrohdr10mode 0 #diva set hdrprofile x where x is [0-5] Sets the HDR to SDR conversion tone mapping profile. 0 = OFF. Applies to only when the input is HDR10. Ex.
Page 58
4K Diva – User Manual #diva set ledgamma x where x is [0-3] 0 = Gamma 2.2 1 = Gamma 2.0 2 = Gamma 1.8 3 = Gamma 1.6 Sets the gamma of the LED elements during active video mode Ex.
Page 59
4K Diva – User Manual Ex. #diva set ledbluegain 31 #diva set lagtesttarget x where x is [0-2] 0 = left top corner 1 = center 2 = bottom right corner Sets the location of the lag test measurement Ex. #diva set lagtesttarget 1 #diva set lagtestenable x where x is 0, 1 Enables/disables the lag tester display...
4K Diva – User Manual IR Code List For convenience, the complete list of IR codes is supplied in Pronto HEX files, it is recommended to always use the latest IR codes list that is included as a text file format with each firmware update. Diva IR codes have also been submitted to Logitech Harmony and iRule.
4K Diva – User Manual What is the difference between Splitter and Matrix option, what are the options for each mode? The below picture represents the available options for both mode. Can we pass-through 4K60 4:4:4 or any HDR signal and have one output at lower resolution ? Yes, when connected correctly to the right downscale output port (TX1), Diva will automatically scale down UHD to FHD if required by the connected SINK (Display, AVR or others).
Page 103
6ft and 12ft for proper 600MHz/18Gbps pass-thru. For 4K30, 1080p or less almost all cables are ok. HDfury Diva acts as a HDMI repeater device. So having HDfury Diva in the path will amplify and recover the signal. You should not need any passive (or active) HDMI amplifiers, especially if you put the HDfury Diva in the middle of your cable run.
Page 104
4K Diva – User Manual If you'd like to use a "regular" TOSLINK cable, use a 3.5mm Mini-TOSLINK to regular TOSLINK adapter: A 3.5mm stereo audio cable can be used for connecting the Diva to a TV if you do not have a home theater setup (you only have 2 speakers in your TV): Disclaimer: party and/or custom firmware providing extra features are not covered in this manual.
4K Diva – User Manual Highlight Hardware Features: Diva Exclusive: 4K HDR 18Gbps/600MHz + 1080p SDR + Full Audio out (extract HDMI/ARC/eARC) + Ambient Light + LAG Tester Diva central is featuring 4 HDMI inputs, 1 HDMI video output with scaling option, 1 HDR>SDR 1080p output and 1 dedicated HDMI full audio output at 720p or 1080p, LAN Control, RS232, L/R stereo or Optical 5.1 output, Led Control, IR RX, IR/Light sensor, IR window, OLED display and 4 buttons on the side allowing to enter/exit and perform change in the device system menu.
Decipher incoming HDR/HLG/DV metadata and AVI infoframe, build your own Custom HDR metadata and AVI infoframe thru HDfury metadata and infoframe creator, translate HLG>HDR, replace or boost value from any metadata on the fly or simply disable all or just some of them. Additionally Diva also support VSIF, AUD, HVS, HFV and others infoframes.
Audio format from TV apps are output to your AVR input thru the same HDMI Audio output. HDMI Audio Extracting HDfury Diva can extract HDMI audio up to 5.1 and pass-thru any sound format in existence today including Atmos and latest via HDMI while downscaling the video for older AVRs, it have a simultaneous output of analog L/R stereo and up to 5.1 optical S/PDIF via 3.5mm combo jack connector.
HDfury Webserver. More powerful with more available options than any Windows GUI we ever did, controlling your HDfury has never been so easy, fast and elegant. No more driver installation or hassle of any kind, superfast in-system firmware update and wide compatibility with any web browser devices (Mac/Win/Linux/iOS/Android and others).
Highlight HDCP Features: Unique HDCP Doctor Providing a total of 15 HDCP 1.4 and 2.2 engines for decryption/encryption, HDfury Diva offers a total HDCP workaround solution including HDCP 2.2 > HDCP 1.4 and HDCP 1.4 > HDCP 2.2 both ways conversion within the same unit.
4K Diva – User Manual Main Specifications 4x Input / 2x Output Splitter/Matrix/Scaler + Audio out (HDMI2.0b/HDMI1.4/DVI1.0 compatible) ■ 4K60 4:4:4 600MHz 18Gbps Pass through ■ 4K24/25/30/50/60 <> 1080p24/25/30/50/60 Upscale/Downscale with or without colordepth maintained and with or without chroma conversion. ■...
4K Diva – User Manual HDMI Equalevel: Precise signal equalization for both input and output signals delivers the best possible picture quality with no dropouts. Hot-Plug control: Force the input device to always see an active connection. Deep Color Support xvYCC Color Support Flexible/Portable/Plug’n Play 3D Ready: Capability to pass 3D stereoscopic signal formats.
4K Diva – User Manual Certifications Diva CE Certification Diva RoHS Certification Diva FCC Certification Disclaimer: party and/or custom firmware providing extra features are not covered in this manual.
4K Diva – User Manual Pro Tips https://youtu.be/NsZoREQtttk - Diva Setup Video https://youtu.be/mtdaiKToex0 - Diva LAG Test Video https://youtu.be/q2w2d6ogGwk - LEDstrip Install Video -Dolby Vision: DV mode 0 and 1 travels thru 8b RGB container, so it is normal that Diva report RGB 8b when playing such DV mode.
Page 114
4K Diva – User Manual Team HDfury thanks you for your support For help visit our support server contact www.HDfury.com Diva was built with love and passion. Disclaimer: party and/or custom firmware providing extra features are not covered in this manual.
Need help?
Do you have a question about the 4K Diva 18Gbps and is the answer not in the manual?
Questions and answers