Selecting An I.link Device - Sony KDS-R50XBR1 Operating Instructions Manual

Selecting an i.LINK Device

Before an i.LINK device can be viewed, it must first be selected via the
i.LINK Device List.
1
Connect the i.LINK device that you wish to operate.
✍
For instructions on connecting i.LINK devices, see page 73.
2
Press on the media receiver unit or the remote control.
i.LINK
i.LINK Device List
DTV
Digital VCR
Status:
Viewing.
The TV (DTV), along with all devices connected by i.LINK to the TV,
appear on the i.LINK Device List.
Devices that are not supported by the TV appear on the Device List as
"Other Device," but cannot be controlled using the TV's remote control
or on-screen i.LINK Control Panel. For these devices, use the remote
control supplied with the device.
3
Press V v to navigate among the i.LINK-connected devices.
or
✍
i.LINK devices can be connected to one another and to the TV
while the TV is powered on. The Device List will automatically
update to include the newly connected device. See page 73 for
more information on connecting i.LINK devices.
4
Press to select the desired device and display the device's i.LINK
Control Panel. Use the i.LINK Control Panel to operate the selected
device. For details, see page 76.
Sony DTV
Using i.LINK
75