Hdmi Settings; General Settings; Initial Setup - Sony KDS-Z60XBR5 Operating Instructions Manual

HDMI Settings

HDMI inputs of this TV will recognize and communicate with other Sony equipment equipped with
HDMI Control.
HDMI Control
Device Auto Power Off Select On to have your connected HDMI Control equipment power off automatically
TV Auto Power On
Device List

General Settings

Language
Info Banner
Power Saving
Logo Illumination
Display Position
Cooling Mode
Lamp Replacement

Initial Setup

If you have missed the Initial Setup when you first connected the TV or if you want to scan all receivable
channels, you can run the Initial Setup. Follow the instructions on the screen. Settings such as picture and
sound adjustments will not be affected by this Initial Setup.
~
• Favorites list will be cleared each time you run the Initial Setup.
48
On/Off feature allows your TV to communicate with other equipment that supports
HDMI Control.
when the TV is turned off. Select Off to disable this function.
Select On to control your TV's power on from your connected HDMI Control equipment.
Select Off to disable this function.
Displays a list of HDMI Control equipment connected to the TV.
Select the language of your choice from English, Español and Français to be used for
displaying all the on-screen settings.
Displays the program name and the program information such as program title and
program rating (if available from the broadcaster) when option is set to On. Select Off for
minimal display information. Selecting Off will not completely disable the banner
display. Info Banner also appears on the screen each time the channel is changed or
DISPLAY on the remote control is pressed.
~
• To see the rating information on the banner, Info Banner setting must be set to On.
Reduces the power consumption by adjusting the lamp brightness. This also enhances the
black level.
Select to illuminate the Sony logo on the front panel of the TV. Select On or Off.
When selected, the guide markers for the TV Display Position will appear at four
corners of the screen. Adjust Vertical position and/or Horizontal position by pressing
V/v/B/b buttons to evenly position the markers.
Select High to use the TV at an altitude of 5,000 feet (1,500 m) or higher.
When the lamp nears the end of its life, a message will appear every time the TV is turned
on. After the lamp is replaced, select this option then follow the steps on screen.