Sony GRAND WEGA KDS-R60XBR2 Operating Instructions Manual page 67

3
Take the new lamp out of the box.
Do not touch the glass portion of the new lamp.
✍
Do not shake the lamp. Vibration can damage the lamp or shorten
its life.
✍
Avoid touching the front glass of a new lamp or the glass of the
lamp receptacle. This may reduce picture quality or lamp life.
4
Remove the outside lamp cover.
Release the clamp as shown in the illustration below.
5
Remove the lamp door.
Turn the screw counterclockwise, and then turn the knob to the left until
the marks on the lid and the case line up. Remove the door.
6
Pull out the lamp.
Hold the indents on the top and bottom of the lamp, as shown in the
illustration, and pull the lamp straight out.
Other Information
Hold this part of the lamp
(Continued)
67