Sony GRAND WEGA KDS-R60XBR2 Operating Instructions Manual page 55

Option
4:3 Default
Select the default screen
mode to use for 4:3
sources.
Display Area
Horizontal Center
Vertical Center
Vertical Size
✍
Size adjustment is especially useful for Wide Zoom picture conditions such as when news ticker
information appears at the bottom or top of the screen.
Description
Wide Zoom Select to enlarge the 4:3 picture, to fill the 16:9 screen, keeping the
original image as much as possible.
Normal Select to display the 4:3 picture in its original size.
Full
Select to enlarge the 4:3 picture horizontally only, to fill the display
area.
Zoom
Select to enlarge the picture horizontally and vertically to an equal
aspect ratio that fills the wide screen.
Off Select to continue using the current Wide Mode setting when the
channel or input is changed.
✍
4:3 Default is not available if Auto Wide is set to Off.
✍
If 4:3 Default is set to anything but Off, the Wide Mode setting changes only for
the current channel. When you change channels (or inputs), Wide Mode is
automatically replaced with the 4:3 Default setting. To retain the current Wide
Mode setting as channels and inputs are changed, set 4:3 Default to Off.
Allows you to adjust the screen area displaying the picture.
Normal Select to display the picture in the original size.
-1/-2
Select to enlarge the picture to hide the edge of the picture.
Allows you to move the position of the picture left and right. Press
adjust.
Allows you to move the position of the picture up and down. (Available only in Zoom.)
Press V/v and press
to adjust.
Allows you to adjust the vertical size of the picture. (Available only in Wide Zoom and
Zoom.) Press V/v and press
to adjust.
Using the Menus
B/b
and press to
55