Sony BRAVIA 2-691-651-13(2) Operating Instructions Manual page 40

6
Pull out the lamp.
For KS-60R200A/50R200A, place your
index finger through the hoop of the lamp
handle and pull it upwards, while placing
your thumb on the dent on the top. Then
pull the lamp out.
For KS-70R200A, hold the indents on the
top and bottom of the lamp, and pull the
lamp straight out.
KS-60R200A/50R200A
KS-70R200A
Notes
• The lamp is very hot after use. Never touch the glass
portion of the lamp or the non-designated surrounding
parts.
• After the used lamp has cooled, place it into the empty
box of the replacement lamp. Never put the used lamp
into a plastic bag.
7
Place the new lamp halfway in. (For
KS-60R200A/50R200A)
Follow the gutter in the housing to mount
the new lamp securely.
KS-60R200A/50R200A
40
GB
Hold this part of the lamp
Hold this part of the lamp
8
Put the new lamp into its place.
For KS-60R200A/50R200A, slide it in
slowly by pressing the PUSH part of the
front corners of the lamp until it stops with
a firm clicking sound to lock.
For KS-70R200A, make sure the lamp is
securely mounted into the compartment.
KS-60R200A/50R200A
KS-70R200A
Notes
• The lamp compartment is tilted.
• To ensure the lamp is securely installed, press the area
marked PUSH before closing the lamp cover.
• If the lamp is not securely reattached, the self-
diagnostic function may be triggered and
red three times (page 14).
KS-60R200A/50R200A
1
flashes in
KS-70R200A