ABB PowerValue 11/31T User Manual page 2

Document information
File name
Model
Date of issue
Article number
Document number
Revision
Foreword
This user manual contains guidelines to install the battery cabinet and it is intended for people who plan the
installation, install, commission and use or service the battery cabinet. The reader is expected to know the
fundamentals of electricity, wiring, electrical components and electrical schematic symbols
This manual contains important instructions that should be followed during installation and operation of the
battery cabinet. This product is designed for commercial / industrial use only, with UPS systems. It is not
intended for use with life support and other designated critical devices.
The battery cabinet has been designed for 12VDC x 9 Ah batteries within precise specifications. It's highly
recommended to make use only of the batteries provided within the following articles:
ABB ordering code
4NWP100119R0003
4NWP100119R0004
ABB Power Protection SA declines any kind of responsibility in the occurrence other batteries than the
recommended ones are installed into the battery cabinet
Batteries contain dangerous substances that will
harm the environment if thrown away. If you
change the batteries yourself, call qualified
organizations for battery disposal and recycling.
COMMISSIONING AND OPERATIONS INSIDE THE
BATTERY CABINBET MUST BE PERFORMED BY A
CERTIFIED SERVICE ENGINEER FROM THE
MANUFACTURER OR FROM AN AGENT CERTIFIED BY
BY NOT FULFILLING THIS OBLIGATION, THE PRODUCT
Modifications reserved
Page 2/30
:
4NWP101805R0001_OPM_ABB_PVA11-31-T_BAT_CAB_EN_REV-B.docx
: Battery cabinet PowerValue 11/31T-96
: 16.11.2016
: 4NWP100119R0002
: 4NWD003001
: B
THE MANUFACTURER.
MAY LOSE ITS WARRANTY
Description
Batt.cabinet PowerValue 11/31T-96 w/batt
Batt.cabinet PowerValue 11/31T-48 w/batt