Download  Print this page

HP 290 G1 PCI Microtower Business Product End-of-life Disassembly Instructions

Hide thumbs
   

Advertisement

Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP 290 G1 PCI Microtower Business PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
PCA, PSU
All types including standard alkaline and lithium coin
or button style batteries PCA
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
PSU
AC Power Cable
System Fan
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
2
1
1
1
1
Page 1

Advertisement

Table of Contents

   Related Manuals for HP 290 G1 PCI Microtower Business

   Summary of Contents for HP 290 G1 PCI Microtower Business

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3 Step2 Disconnect ODD power cable and ODD SATA cable from ODD. Step3 Disconnect HDD power cable and HDD SATA cable from HDD. Step4 Remove the driver cage from chassis EL-MF877-00 Page 3 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 4 Step5 Press the ODD’s latch on ODD cage Step6 Remove the ODD from ODD cage Step7 Use T-15 screwdriver to loose the screws of HDD and remove HDD from HDD cage EL-MF877-00 Page 4 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 5 Step8 Disconnect all cables from MB. Step9 Disconnect heat sink fan cable from Step10 Use T-15 screwdriver to loose the screws and remove heat sink EL-MF877-00 Page 5 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 6 Step11 Use PH1 screwdriver to loose the screws and remove the heat sink fan. Step12 Remove the Memory from MB Step13 Rotate the handle and open it up to remove CPU from MB. EL-MF877-00 Page 6 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 7 Step14 Remove the battery from MB. Step15 Remove front panel from chassis Step16 Use T-15 screwdriver to loose the screws of MB and remove MB from chassis EL-MF877-00 Page 7 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 8 Step17 Use PH1 screwdriver to loose the screws of system fan and remove it Step18 Use T-15 screwdriver to loose the screws of PSU Step19 Press the PSU’s latch on chassis and remove it. EL-MF877-00 Page 8 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 9 Step20 Use PH1 screwdriver to loose screws from PSU Step21 Open the PSU cage and use PH1 screwdriver to loose the screw of PCBA cable Step22 Use PH1 screwdriver to loose screws and remove PCB from case EL-MF877-00 Page 9 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 10 Step23 Use Electric Iron remove caps from EL-MF877-00 Page 10 Template Revision B PSG instructions for this template are available at EL-MF877-01...

This manual is also suitable for:

280 g3 microtower business280 pro g3282 pro g3286 pro g3290 g1280 g3 pci ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: