Sony DPP-EX50 Operating Instructions Manual page 39

Note
Once you select "Execute", you cannot
move or delete the characters.
Registering commonly-used
characters as a message
You can register commonly-used
characters as a message and can load
them later onto the character input box.
Up to three messages, each message
with the maximum of 80 characters, can
be registered.
1
Follow steps 1 through 5 in
"Superimposing characters"
(pages 36 and 37) to enter
characters that you want to
register as a message in the
input box.
2
Press the arrow (B/b/V/v)
button to select "LOAD/SAVE"
and press ENTER.
The dialog box to register and save
messages is displayed.
3
Press the arrow (B/b) button
to select "Save" and then
press ENTER.
The message selection screen is
displayed.
4
Press the arrow (V/v) button
to select the message box that
you want to save the
characters in and press ENTER.
The input characters are registered
as a message.
To load a registered message
In step 3 above, select "Load" to display
the window used for selecting a
message.
Press the arrow (V/v) button to select
the desired message and press ENTER.
The selected message is placed in the
character input box.
Note
The characters having been input in the input
box will be overwritten and replaced with
the message.
Continued
GB
39