Sony DPP-EX50 Operating Instructions Manual page 119

Check
Symptom
• Is "Exif Print" checked
Colors are not
reproduced
correctly.
• Is "ICM" selected in
Preview image does
not reflect the print
settings in the
"Graphics" tab of
the "DPP-EX50
Properties" dialog
box.
Print quantity
• Are you using
specified in the
"Paper/Output"
tab of the "DPP-
EX50 Properties"
dialog box does not
take effect.
in the "Graphics" tab
of the "DPP-EX50
Properties" dialog
box?
the "Graphics" tab of
the "DPP-EX50
Properties" dialog box?
PictureGear Studio?
Cause/Solutions
c The Exif Print setting in the "Color
reproduction/Picture quality" section
supports the PictureGear Studio only. To
print from other application, uncheck "Exif
Print."
The ICM setting may be valid only when
c
you are using an ICM-compliant
application. Check to see if the application
software you are using supports ICM.
The print settings adjusts the printer itself
c
and cannot influence the preview image.
Set the print quantity in the "Print" dialog
c
box of the PictureGear Studio. The print
quantity setting in the "Paper/Output"
tab of the printer driver does not take
effect.
c Depending on the application you use, the
print quantity setting of the application you
use may have priority over the setting
specified in the printer driver dialog box.
GB
119