Table of Contents
Advertisement
Operation
36/60
3.4.1
Navigation
The device is operated with the navigation ring.
Switch on lamps:
Tip the button once.
Switch off lamps/interrupt application:
Hold the button.
Select device function (go to pictogram)
e.g. VOLUME
Select sub-function (if available)
Change setting
The diodes of the available functions and the navigation ring are illuminated in
default mode after starting up the device. After selecting a function, the re-
spective diodes and the navigation ring flash for a few seconds. Settings can
be changed during this time.
Operation – Demonstration mode
–
press until
The audio functions and Vibra Shape can be tested in demonstration mode.
You have 30 seconds in which to select the function.
Advertisement
Table of Contents
