Changing the door hinging
Screw door catch into place on the
opposite side, having turned it by
180 °C.
Plug the holes with stoppers sup-
plied.
Fit bearing block together with
freezer compartment door in posi-
tion at the top , then tighten bear-
ing block securely.
Flip the cover on bearing block
back up.
52
Changing over the door handle
Carefully remove cover and stop-
pers from the sides.
Slide cover over to the left and
then insert a suitable plastic or
wooden tool into the gap on the
right hand side.
Carefully lever cover off.
Be careful not to let the tool slip
out and damage the appliance sur-
face.