BarefootSpas PL8 Owner's Manual page 17

~ Troubleshooting ~
Pump/motor is not working correctly
Check the GFCI and topside
1
control to make sure the spa
is receiving power.
Remove the spa panels
1
around the pump and try
to turn it on by pressing its
coresponding 'Jets' button.
Pump and motor appear to be
functioning correctly, the shaft
can be seen rotating – The pump
is 'airlocked.' Bleed the pump
(using one of the bleeder valves)
with the pump on.
See Troubleshooting – Air in the
Pump.
Motor is making a buzzing
sound and the shaft is not
rotating Motor is likely
damaged. Contact service.
No activity from the motor or
pump, a clicking noise can be
heard from the spa pack –
If that does not solve the problem,
!
follow the actions below.
No activity from the motor or
!
pump, no clicking noise from
the spa pack – Likely a problem
with the wiring or the topside
control.
Contact Customer Support.
!
Motor is likely damaged.
Contact service.
Replace the fuse for the
corresponding pump in the
spa pack.
17