Spa Mode - Beachcomber Hot Tubs ET-1000 Reference Manual

spa mode

To select the spa mode, slide the
left wheel up or down until the spa
icon is highlighted in the middle.
The home screen will display its
equipment start or stop keys, up and
down buttons, water temperature,
messages and quick access to display
options:
display orientation
•
display contrast
•
To select an option, slide the right
wheel up or down until the desire
icon menu is highlighted in the
middle.
display orientation
To modify the display orientation
settings, slide the right wheel until
the display orientation icon is
highlighted in the middle.
Simply touch the line of the
orientation you want to select.
mode selection
wheel:
To select the settings mode, slide the left wheel up or down until the settings icon
menu is highlighted in the middle.
In the Settings screen you can access the following:
• filter mode
• m a intenance
• date & time
• keypad
2
To select an item, slide the right wheel until the desired icon is highlighted in the middle or press on the menu name.
start or stop accessories
To start or stop an accessory
(pump, blower, light), touch the
associated icon. Icons will become
animated when their accessory is
turn on, and animation will stop
when turn off.
Icons on the screen will reflect the
speed or state of the devices
running on your spa. When an
accessory has more than one
speeds press the button until it
reaches the desired speed.
display contrast
To modify the display contrast
settings, slide the right wheel until the
display contrast icon is highlighted in
the middle.
Simply touch the line of the contrast
you want to select.
You can use the Settings mode to manage settings of your spa system.
electrical configuration
•
wifi
•
miscellaneous
•
about
•
spa mode
settings
ist of featured items
L
water temperature
The temperature at the bottom of the
screen shows the current water
temperature. Use the Up and Down icon
to set the desired temperature. The set
point will appear in blue. After 3 seconds
without any changes to the set
temperature value, the current water
temperature will reappear.
When the set value is lower than the
current temperature Cooling to xx.x will
appear below. When the set value is
higher than the current temperature,
Heating to xx.x will be indicated under
the value. Normally there is a short delay
before the heating starts, during which
Heating Suspended is indicated under
the value.
sleep
Press key to go directly into the sleep
mode. In sleep mode, water
splashing on the keypad can't
inadvertently start/stop a pump.
direct to function
selection wheel:
filter mode -
maintenance -
date & time -
electrical config -
keypad -
wifi -
about -