Related Manuals for PSG Wilden XSD Series
Summary of Contents for PSG Wilden XSD Series
- Page 1 Engineering Operation & Maintenance Advanced™ Metal Surge Dampener W h e r e I n n o v a t i o n F l o w s www.wildenpump.com WIL-19011-E-07 REPLACES WIL-19011-E-06...
-
Page 2: Table Of Contents
T A B L E O F C O N T E N T S SECTION 1 CAUTIONS—READ FIRST! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 SECTION 2 WILDEN PUMP DESIGNATION SYSTEM . -
Page 3: Cautions-Read First
S e c t i o n 1 C A U T I O N S — R E A D F I R S T ! CAUTION: Do not over-lubricate air supply — CAUTION: The process fluid and cleaning fluids excess lubrication will reduce performance. - Page 4 S e c t i o n 2 W I L D E N D E S I G N A T I O N S Y S T E M XSD X/XXX X / XXX / XX / XXXX XSD EQUALIZER LEGEND ®...
- Page 5 S e c t i o n 3 H O W I T W O R K S — D A M P E N E R All reciprocating pumps generate discharge pressure The Equalizer automatically sets and maintains the ®...
-
Page 6: Dimensional Drawings
S e c t i o n 4 D I M E N S I O N A L D R A W I N G S XS D1 DIMENSIONS — XSD1 METAL DIMENSION METRIC (mm) STANDARD (inch) 11.6 11.6 11.7 XS D2 DIMENSIONS —... -
Page 7: Xsd3
D I M E N S I O N A L D R A W I N G S XS D2 Ad va n c e d DIMENSIONS - XSD2 ADVANCED METAL ITEM METRIC (mm) STANDARD (inch) 13.6 10.1 11.0 20.2 12.8 125 DIA... - Page 8 S e c t i o n 5 X S D 1 P E R F O R M A N C E XSD1 TNU XSD1 TNU [4.1 bar (60 psig) inlet air / 3.4 bar (50 psig) discharge head] [6.89 bar (100 psig) inlet air / 6.2 bar (90 psig) discharge head] 5.5 (80) 8.3 (120)
- Page 9 X S D 2 P E R F O R M A N C E XSD2 TNU XSD2 TNU [6.89 bar (100 psig) inlet air / 6.2 bar (90 psig) discharge head] [4.1 bar (60 psig) inlet air / 3.4 bar (50 psig) discharge head] 5.5 (80) 4.1 (60) 2.8 (40)
- Page 10 X S D 3 P E R F O R M A N C E XSD3 TNU XSD3 TNU [4.1 bar (60 psig) inlet air / 3.4 bar (50 psig) discharge head] [6.89 bar (100 psig) inlet air / 6.2 bar (90 psig) discharge head] 8.3 (120) 4.1 (60) 6.9 (100)
- Page 11 S e c t i o n 6 S U G G E S T E D I N S T A L L A T I O N The model XSD1 has a 25 mm (1") inlet/discharge. The model pump and the discharge side of Equalizer ®...
- Page 12 T R O U B L E S H O O T I N G 1) When there is a significant drop in the fluid discharge 2) Fluid leakage around the clamp band area is normally pressure, there will be a noticeable release of air stopped by tightening the clamp band bolts.
- Page 13 S e c t i o n 7 D A M P E N E R D I S A S S E M B L Y CAUTION: Before any maintenance or repair is attempted, the compressed To o l s R e q u i r e d : air line to the Equalizer and the pump should be disconnected and all air ®...
- Page 14 D A M P E N E R D I S A S S E M B L Y Step 4 Step 5 Step 6 Set liquid chamber aside. Remove reducer bushing at top of Loosen shaft assembly by using regulator.
- Page 15 D A M P E N E R D I S A S S E M B L Y Step 11 Step 12 Step 10 Disassembly of the regulator body In the event of an air leak, remove In the event of an air leak, remove from the regulator adaptor plate the regulator adaptor plate and the air chamber and replace the...
-
Page 16: Reassembly Hints & Tips
R E A S S E M B L Y H I N T S & T I P S ASSEMBLY: SHAFT SEAL INSTALLATION: Upon performing applicable maintenance to the PRE-INSTALLATION air distribution system, the Equalizer can now ® • Once all of the old seals have been removed, the be reassembled. - Page 17 N O T E S...
-
Page 18: Exploded View & Parts Listing
S e c t i o n 8 E X P L O D E D V I E W & P A R T S L I S T I N G XSD1 ORIGINAL METAL E X P L O D E D V I E W PTFE FITTED RUBBER FITTED SIPD FITTED... - Page 19 E X P L O D E D V I E W & P A R T S L I S T I N G XSD1 ORIGINAL METAL P A R T S L I S T I N G XSD1/AAAA/ XSD1/SSSS/ Part Description...
- Page 20 E X P L O D E D V I E W & P A R T S L I S T I N G XSD2 ORIGINAL METAL E X P L O D E D V I E W PTFE FITTED RUBBER FITTED SIPD FITTED...
- Page 21 E X P L O D E D V I E W & P A R T S L I S T I N G XSD2 ORIGINAL METAL P A R T S L I S T I N G XSD2/AAAA XSD2/SSSS Part Description...
-
Page 22: Xsd2 Metal Advanced
E X P L O D E D V I E W & P A R T S L I S T I N G XSD2 ADVANCED METAL E X P L O D E D V I E W WILDEN PUMP &... - Page 23 E X P L O D E D V I E W & P A R T S L I S T I N G XSD2 ADVANCED METAL P A R T S L I S T I N G XSD2/AAAA/040 Part Description Qty.
- Page 24 E X P L O D E D V I E W & P A R T S L I S T I N G XSD3 ORIGINAL METAL E X P L O D E D V I E W PTFE FITTED RUBBER FITTED ULTRA-FLEX FITTED...
- Page 25 E X P L O D E D V I E W & P A R T S L I S T I N G XSD3 ORIGINAL METAL P A R T S L I S T I N G XSD3/AAAA/ XSD3/SSSS/ Part Description...
-
Page 26: Elastomer Options
S e c t i o n 9 E L A S T O M E R O P T I O N S BACK-UP ULTRA-FLEX™ ELASTOMER DIAPHRAGM SIP DIAPHRAGM O-RINGS DIAPHRAGM DIAPHRAGM NEOPRENE 04-1010-51 04-1060-51 04-1020-51 04-1030-72 NITRILE 04-1010-52 04-1060-52 04-1020-52 70-1280-52... - Page 27 W a r r a n t y Each and every product manufactured by Wilden Pump and Engineering, LLC is built to meet the highest standards of quality. Every pump is functionally tested to insure integrity of operation. Wilden Pump and Engineering, LLC warrants that pumps, accessories and parts manufactured or supplied by it to be free from defects in material and workmanship for a period of five (5) years from date of installation or six (6) years from date of manufacture, whichever comes first.
- Page 28 Where Innovation Flows PSG reserves the right to modify the information and illustrations contained in this document without prior notice. This is a non-contractual document. 11-2014 A u t h o r i z e d P S G R e p r e s e n t a t i v e : 22069 Van Buren St.