Display Brightness; Memory; Refill Reminders; Autoopen - Miele G 7100 I Operating Instructions Manual

Settings

Display brightness

You can set the display brightness to
one of seven different levels.

Memory

When the Memory
on, the most recently started pro-
gramme is saved.
When you switch the dishwasher off
and back on again after the end of a
programme, the last programme started
will be selected. This may increase en-
ergy consumption.

Refill reminders

If you only ever use combination deter-
gent products or automatic dispensing
using Miele PowerDisks (if available),
you can switch off the refill reminders
for dishwasher salt and rinse aid if you
wish.
Please make sure that if you stop us-
ing combination detergents, you refill
the dishwasher salt and rinse aid.
Switch the refill reminders back on.
100
function is switched

AutoOpen

In some programmes the door automat-
ically opens slightly to assist the drying
process.
This function can be deactivated if you
wish.

Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate work-
tops when you open the door at the
end of the programme if the fan is no
longer running.
If you have deactivated the auto-
matic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.