Table of Contents
Advertisement
Rinse Aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6 ml.
3 ml is the factory default setting.
The rinse aid dosage can turn out to be
higher than the set value due to the au-
tomatic adjustment of the program.
If spots appear on dishes and glass-
ware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
dishes and glassware:
- Decrease the rinse aid dosage.
Display brightness
You can set the display brightness to
one of 7 different levels.
Buzzer
A sequence of audible signals will
sound at the end of the program or if
there is a fault, provided that the audi-
ble signals have been activated.
The audible signals at the end of a pro-
gram and the alarm tone in the event of
a fault will sound 4 times at intervals
with a short pause between each set.
You can deactivate the audible signal
that sounds at the end of a program if
you wish.
The alarm tone that sounds when
there is a fault cannot be deacti-
vated.
Settings
31
Advertisement
Table of Contents
