Table of Contents
Advertisement
10
CALIBRATING THE THUMB
Connect the device to ND Suite. Then go to Flex tab and press "calibrate".
Select "Advanced" and follow the instructions.
11
CALIBRATION IN DEMO
To see your arms and hands follow the instructions displayed at the beginning
of the demo. It is possible to set up you own calibration procedure in those
demos that you develop. Example of a calibration:
18
AVATAR VR - QUICK START GUIDE
90º
When indicated, place your arms in
front of you at a 90º angle and close
your hand for a few seconds.
1
2
3
IMPORTANT: When you close your
hand you have to make contacts the
three conductive zones indicated in
the image.
Advertisement
Table of Contents
