Using Other Functions; To Prevent Sound From Skipping (Esp) - Sony D-V55 Operating Instructions Manual

To select an item number 10 or
more, press
corresponding number buttons.
Examples:
For 12:
For 24:
For 135:
3
Repeat step 2 to program the
remaining tracks.
4
Press ^ .
"RMS" stops flashing and the tracks
you have chosen play in the order
you specified.
To cancel RMS play, press PLAY MODE
until "RMS" disappears.
To check the program
During programming:
Press REPEAT/ENTER before step 4.
During RMS play:
Press PLAY MODE repeatedly until
"RMS" flashes, then press REPEAT/
ENTER.
Each time you press REPEAT/ENTER,
the track number and the playing order
appear in the order you specified.
Note
•If you program another track after the
22nd track, the first track programed is
cleared and the new track is programed
instead.
GB
24
first, then the
, then 1 and 2
, then 2 and 4
, , then 1, 3 and 5

Using other functions

To prevent sound from skipping
(ESP)
The ESP (Electronic Shock Protection)
function prevents the sound from
skipping by using a buffer memory that
stores music data for about 10 seconds.
Use this function when listening in a car
or during a walk.
ESP
Press ESP.
The ESP indication appears.
To release the ESP function, press ESP
again.
Notes
•Playing may stop when the player gets a
strong shock even with the ESP function
on.
•You may hear a noise or sound skip
when:
— listening to a dirty or scratched audio
CD,
— listening to an audio test CD or,
— the player receives continuous shock.
•Sound may be intermittent for a while if
you press ESP during play.
•While playing the VIDEO CD, the ESP
function is disabled.