Weatherproof emergency telephone with remote programming and optional strobe feature (20 pages)
Summary of Contents for CEECO SSP-530-X
Page 1
WPP-530-X OR SSP-510-X-LPSPKRPCB-ISSUE4.0 SERVICE MANUAL MODEL WPP-530-X HANDS FREE EMERGENCY WEATHERPROOF TELEPHONE MODEL SSP-510- X HANDS FREE STAINLESS STEEL PANEL TELEPHONE EQUIPPED WITH LOW-POWER SPEAKER BOARD Sold by: http://www.TWAcomm.com Toll Free: (877) 892-2666 Serving the Telephone Industry Since 1930 Communication Equipment 1580 NW 65 Avenue &...
Page 2
ISSUE 4.0 IMPORTANT INFORMATION CUSTOMER Please fill in before you continue. The following information is necessary when calling CEECO for assistance. MODEL NUMBER MODEL WPP-530-X OR SSP-510-X, EQUIPPED WITH LOW-POWER SPEAKER BOARD SERIAL NUMBER DATE MANUFACTURED LOCATION INSTALLED For us to better serve you, please have this information available when calling for technical support.
RECOMMENDED TOOLS AND TEST EQUIPMENT ........7 INSTALLATION NOTES AND ASSEMBLY INSTRUCTIONS ..... 8 SPECIFICATIONS....................10 PARTS LIST: ......................11 FCC NOTICE......................12 10.0 REPAIR AND RETURN INFORMATION............13 11.0 WARRANTY POLICY ..................14 CEECO Communication Equipment & Engineering Company PROPRIETARY...
INTRODUCTION The practices in this manual provide installation and maintenance information for the CEECO Model WPP-530-X hands free weatherproof Telephone or the SSP- 510-X hands free stainless steel panel telephone. The information in this manual is subject to change without notification.
1, 3, or 5 minutes. Please refer to the diagram on the following page for assistance in locating the mini-jumpers. Programming is now complete and the telephone is ready for testing/operation. CEECO Communication Equipment & Engineering Company PROPRIETARY...
Page 6
ISSUE 4.0 PROGRAMMING DIAGRAM CEECO Communication Equipment & Engineering Company PROPRIETARY...
(refer to section 3.0). RECOMMENDED TOOLS AND TEST EQUIPMENT Security Tool, CEECO part number 301-064 Insulated Needle Nose Pliers Flat Blade/Phillips Head Screwdriver CEECO Communication Equipment &...
Run the inside station wire into the enclosure and terminate on the RJ11C terminal block inside, as depicted on the following page. The CEECO provided terminal block (jack) must be used, as it contains required over- voltage protection circuitry.
Page 9
CONFIDENTIAL This drawing and all information contained therein is confidential and is the exclusive property of CEECO and may not be copied, reproduced or disclosed to anyone, in any manner whatsoever, or used for any purpose other than for which it is provided to you, without the prior written permission of CEECO.
FCC registration number and ringer equivalence number. These numbers are listed in section 7.0 The FCC further requires that you notify your local telephone company when permanently disconnecting this telephone. CEECO Communication Equipment & Engineering Company PROPRIETARY...
1580 NW 65th Avenue Plantation, FL 33313 (954) 587-5430 10.3 NON-WARRANTY REPAIR CEECO will repair equipment out of warranty for a set charge plus parts. The customer must pay the shipping costs for both directions. 10.4 RETURN FOR CREDIT Material may be returned for credit only with prior approval. Material authorized for return is subject to a 15% restocking charge based on the manufacturer's list price.
PRINTED CIRCUIT BOARDS Printed circuit boards should not be field repaired. If a unit is found to be faulty, replace it with another unit and return the faulty unit to CEECO for repair. Modifications by anyone other than CEECO will void the warranty.
Need help?
Do you have a question about the SSP-530-X and is the answer not in the manual?
Questions and answers