SARAD MyRIAM User Manual page 15

MyRIAM
100 is necessary to get the result as a percentage. In practice the Myriam beta sensitivity will
be calibrated by a test source which gives the correct value for the used nuclide.
The "Sample Interval" defines the integration interval for the measurement. After completion
of each sequential interval a data record will be stored into the internal data logger.
If the check box "Beep" is marked, the internal buzzer will sound for each keystroke.
Sets the real time clock of the Myriam to the actual PC time.
Loads the actual set-up information from the Myriam into the edit fields of the set-up
dialog.
Transfers the content of the edit fields to the Myriam. After transfer, the Myriam will
show the dose values using the units as actually selected.
Manual_Myriam_EN_10-04-08.doc
- 15 -
(c) SARAD GmbH