Advertisement
WT191515SH
ASSEMBLY INSTRUCTIONS
IMPORTANT NOTES:
* Assemble your screen house before camping
to become familiar with the assembly.
* Two people are recommended for setup.
* Select a clean, level area for the campsite, free
of debris and sharp objects, away from any
natural watercourse.
* To prevent damage to the zippers, unzip the
doors and windows of the screen house prior
to disassembly.
Step 3: Assemble roof frame
1) Use the illustration below and on page 4 as a guide.
2) Locate blue ridge pole (D) with pre-attached color-coded connectors. Attach the green corner roof poles (C) and orange middle roof poles (B),
matching color-coded poles to color-coded connector openings. Check that pole R-springs are snapped into connector slots.
3) Attach the yellow front and rear eave poles (F) and pink side eave poles (E) using the 4-way corner connectors.
4) Roof frame appears as shown.
5
7
Step 1: Verify package contents
Screen : 1 each
Connectors : 11 each (total)
(Pre-attached)
4 way -3 each
4 way - 4 each
3 way - 2 each
3 way - 2 each
Deck Feet : 8 each
3
D
1
C
B
F
4
2
E
4
F
Steel Poles : 19 each (total)
( ) denotes color coding
(A) Leg (Red) - 8 each
(B) Middle Roof (Orange) - 2 each
(C) Corner Roof (Green) - 4 each
(D) Ridge (Blue) - 1 each
(E) Side Eave (Pink) - 2 each
(F) Front & Rear Eave (Yellow) - 2 each
Hanging Shelf :
2 each
Tent Stakes : 32 each (total)
8'' - 32 each
Rope Lights : 3 each
(batteries not included)
3
C
C
B
7
E
2
F
Step 2: Assemble poles
1) Assemble steel poles by inserting the
tapered ends into the adjacent sections.
Organize frame poles by color and length.
8 each (A) Leg (Red)
2 each (B) Middle Roof (Orange)
Video Screen :
1 each
4 each (C) Corner Roof (Green)
1 each (D) Ridge (Blue)
2 each (E) Side Eave (Pink)
2 each (F) Front & Rear Eave (Yellow)
Step 4:
Attach leg poles
1) On one side of the screen house attach red leg
poles (A) snapping R-springs into connector slots.
2) Unseat the the bottom section of the leg
poles. This will lower the roof frame to aid in
attaching the body of the screen house.
3) Repeat the process for remaining leg poles (A) on
opposite side of screen house.
5
WT191515SH 09/18
Advertisement
