Connector For Solenoids - Bosch Rexroth A7VO 63 Series Manual

40 A7VO Series 63 | Axial piston variable pump

Connector for solenoids

Connector for solenoids
DEUTSCH DT04-2P-EP04
Molded connector, 2-pin, without bidirectional suppressor
diode
There is the following type of protection with mounted
mating connector:
▶ IP67 (DIN/EN 60529) and
▶ IP69K (DIN 40050-9)
▼ Circuit symbol
▼ Mating connector DEUTSCH DT06-2S-EP04
Consisting of
1 housing
1 wedge
2 sockets
The mating connector is not included in the scope of
delivery.
This can be supplied by Bosch Rexroth on request (material
number R902601804).
Note
If necessary, you can change the connector orientation by
turning the solenoid housing.
The procedure can be taken from the instruction manual.
Bosch Rexroth AG, RE 92202/02.2015
DT designation
DT06-2S-EP04
W2S
0462-201-16141