BEDIENUNGSANLEITUNG/USER MANUAL
3 . EI NBÜRST EN/AG I TATE
Die RB mit dem E-Gerät verbinden und bei
langsamer Umdrehung den Schaum in die
gesamte textile Fläche einbürsten (verhindert
Wasserflecken). Der Schaum löst den Schmutz
und kapselt ihn beim Trocknen ein.
Use the RB together with the power tool and
agitate the dry foam into the entire textile
surface (avoids water marks). The foam looses
the dirt from the fiber and encapsulates it.
4 . NACHARBE ITEN/DE TAILE D CLEANI NG
Zuerst 4 Teile Wasser, danach 1 Teil PS1 in
die HSB füllen. Reihenfolge beachten, um
Aufschäumung zu verhindern. Durch Drücken
der Flasche Trockenschaum herstellen und
in Ecken und schwer erreichbaren Stellen
einmassieren.
Fill the HSB first with 4 parts water, then
1 part PS1. Keep this order to avoid foam.
Pump to create foam. Use it to clean corners,
edges and other difficult to reach areas.
5 . SCHM UTZ AUFNEH ME N/DIRT PI CK-UP
Nach dem Bürsten den eingekapselten
Schmutz mit dem HT1 aufnehmen und/oder
absaugen.
Upon brushing, use HT1 to pick up the dirt
and/or vaccum.
5/8
Need help?
Do you have a question about the PSS Power Kit and is the answer not in the manual?