Do you have a question about the PRO 35 and is the answer not in the manual?
Questions and answers
Adrian McDermott
May 24, 2025
How to replace damaged electrical cord
1 comments:
Mr. Anderson
May 26, 2025
To replace the damaged electrical cord on a Carpet Cleaner PRO 35:
1. Disconnect the plug from the main electricity supply. 2. Use only the spare part number #G46 or a DIN 57.281 part 402/VDE 0281 part 402 05W 3x1 mm² cable for replacement. 3. Ensure all mains supply cable connections are protected against water splashing. 4. The machine must be fitted with a power safety switch or a 10-amp fuse.
Always follow safety precautions and ensure only trained personnel perform the replacement.
Need help?
Do you have a question about the PRO 35 and is the answer not in the manual?
Questions and answers
How to replace damaged electrical cord
To replace the damaged electrical cord on a Carpet Cleaner PRO 35:
1. Disconnect the plug from the main electricity supply.
2. Use only the spare part number #G46 or a DIN 57.281 part 402/VDE 0281 part 402 05W 3x1 mm² cable for replacement.
3. Ensure all mains supply cable connections are protected against water splashing.
4. The machine must be fitted with a power safety switch or a 10-amp fuse.
Always follow safety precautions and ensure only trained personnel perform the replacement.
This answer is automatically generated