Operating With The Dual Controller And Deadman Control; Operating Mini-Lifting Bags 8 Bar (116 Psi) With Controller, Fitting Construction - Vetter V10 Technical Data Manual

Vetter Mini-Lifting Bags 8 bar (116 psi)
Vetter Super Mini-Lifting Bags 8 bar (116 psi)
Operating with the
dual controller and
deadman control
8
10
The positioned Mini-Lifting
Bags can be inflated after
opening the handwheel on
the pressure reducer (3).
Pull back the lever (10) on
the controller to inflate the
Mini-Lifting Bag.
Keep an eye on the mano-
meter (8) and the load.
Once the desired lifting
height or maximum
working pressure of 8 bar
(116 psi) is reached stop
inflation by releasing the
lever.
The lever automatically
returns to the middle
position = deadman
position.
If the working pressure
22
exceeds 8 bar (116 psi) the
safety valve opens.
Push the lever forwards to
lower the load or com-
pletely deflate the Mini-
Lifting Bags.
Disconnect the completely
deflated bags and inflation
3
hoses at the end of the
lifting procedure.
Close the air supply. Pull
back the lever to depressu-
rise the air hose of the
pressure reducer or the air
supply hose from the
external air supply. Then
push the lever forwards
briefly so that the integrated
return valve is
depressurised.
Operating Mini-Lifting
Bags 8 bar (116 psi)
with controller,
fitting construction
Connect bags and inflation
hoses as described above.
Open the compressed-air
supply.
Open the ball valve (6) to
inflate the Mini Lifting Bag.
Keep an eye on the
manometer and load.
Once the desired lifting
height or maximum
working pressure of 8 bar
(116 psi) is reached stop
inflation by closing the ball
valve.
If the working pressure
exceeds 8 bar (116 psi) the
safety valve opens.
To lower the load or
completely deflate the Mini-
Lifting Bags, open the
discharge device on the
head of the safety valve by
turning anti-clockwise.
On completion of the lifting
procedure, disconnect the
completely deflated lifting
bags and inflation hoses.