Vortex PURE PRO Specification & User Manual page 3

Programming Usage
Press PN + Programmed key, OR
Press Toggle(FN+Right SHIFT) to light up right FN key first. Then press the programmed key directly. If you
press PN + Programmed key at this moment, it will output the original key code.
Programming Examples
1. Program A as 123: FN + Right CTRL, A, 1, 2, 3, PN
2. Continue to program FN + A as 456: FN + A, 4, 5, 6, PN
3. Continue to program B as CTRL + C: B, CTRL(Not release), C, Release CTRL and C, PN
4. Continue to program C invoking CMD under WIN7: WIN, C, FN + G, M, FN + G, D, FN + H, ENTER, PN
5. Finish programming: FN + Right CTRL
6. Invoking programmed A: PN + A => Output 123
7. Invoking programmed FN + A: PN + FN+ A => Output 456
8. Invoking programmed C: PN + C => Running CMD.EXE
9. Switch to PN layer: Toggle(FN + Right SHIFT) => Right FN LED on
(1) Invoking programmed B: B => Outpu CTRL + C (Same as copy)
(2) Invoking programmed FN + A: FN+ A => Output 456(No need to press PN)
(3) Invoking programmed C: C=> Running CMD.EXE
(4) If you need to get the A back (Now pressing A is 123): PN + A => A
Restore to factory default
Press and hold FN + R, Toggle LED is flashing after 3 sec. Continue to hold FN + R until the Toggle LED flashes
for 9 times will restore to factory default
FN +
FN General keys
1
2
3
4
5
6
7
8
9
0
- _
=
= +
I
P
[ {
] }
X
↑
↓
←
→
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
INS
Print Screen
Scroll Lock
Pause
APP
Page Up
Page Down
HOME
END
Remark
Key code change