Assembly - Hardi Boss Series Instruction Book

Assembly

Preassembly information
The sprayer is supplied ex-works in shipping packages (SP). Number
of SP's per sprayer varies depending on model.
As this covers all BS/HR models, please note the fittings covering
exactly your model.
NOTE: Removal of the plastic bag covering the tank is easiest done
before assembly.
Some components are shipped within the tank. Check inside.
To verify connection of hoses, a function diagram is included on the
last page.
Packaging information
Materials used for packaging are environmentally compatible. They
can be safely deposited or they can be burnt in an incinerator.
Recycling
Cardboard: Can recycle up to 99% and therefore should be put into
the waste collection system.
Polystyrene foam: Can be recycled. Fluorocarbons (CFC) not used in
foam production. Polyethylene: Can be recycled.
NOTE: Use O-rings where indicated. Lubricate them with non-mineral
lubricant (silicon oil) before assembly. Where O-rings are not indicated,
use sealing tape.
Check that all shipping packages are present.
27