Sony VGN-UX300 Series User Manual page 136

To ensure compliance with the FCC RF exposure requirements, use only Sony supplied accessories for body worn
operation which provides a distance to the body of at least 1 cm.
Use only specified peripheral equipment and interface cables; otherwise, problems may occur.
Do not use cut or damaged connection cables.
If your computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In
this case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and contact
an authorized Sony Service Center. To find the nearest center or agent, see Sony Support Information
visit the Sony online support Web site.
Make sure you disconnect the power cord before cleaning your computer.
To avoid losing data if your computer is damaged, back up your data regularly.
Make sure to put your computer into the supplied protective pouch before you carry the computer.
The supplied protective pouch is not shock-resistant. It is intended to protect your computer from scratches.
Hold your computer with the LCD screen facing upwards and insert the computer into the supplied protective pouch
from its left side.
The supplied protective pouch is not water-resistant. Make sure to wipe water off the case right away if it gets wet.
Do not use any solvents, such as benzine or thinner, to clean the supplied protective pouch.
n 136 N
Precautions
(page 186) or