Sony VAIO VGC-RM1 Series User Manual page 112

9 Connect the SATA cables to the hard disk drives as follows:
Connect the internal SATA cables:
PORT0 cable
PORT1 cable
PORT2 cable
PORT3 cable
!
Use of a commercially available SATA cable with the straight-head connector may damage the connector on the hard disk drive by being pulled out
when you replace the drive holder. We recommend you use Sony SATA cables exclusively designed for your computer.
10 Replace the front panel.
See Removing and Replacing the Main Unit Front Panel
To the hard disk drives in:
Rightmost drive bay
Second drive bay from the right
Third drive bay from the right
Leftmost drive bay
(page 89)
Upgrading Your VAIO Computer
for the detailed instructions.
n 112 N