Page 1: User Guide
User Guide Personal Computer V G C - R M 1 S e r i e s...
Page 2: Table Of Contents
Contents Before Use ...5 Documentation ...5 Ergonomic Considerations ...9 Getting Started ...11 Getting to Know Your Computer ...12 About the Indicator Lights ...19 Setting Up Your Computer ...20 Shutting Down Your Computer Safely ...34 Using Your VAIO Computer ...35 Using the Optical Disc Drive ...36 Using PC Cards ...46 Using the Memory Stick Media ...49 Using Other Memory Cards ...54...
Page 3 Customizing Your VAIO Computer ...78 Setting the Password ...79 Setting Up Your Computer with VAIO Central ...82 Using the Power Saving Modes ...83 Upgrading Your VAIO Computer...85 Before Upgrading Your Computer ...86 Removing and Replacing Computer Panels ...87 Adding and Removing Memory...93 Installing an Add-on Card ...99 Replacing the Lithium Battery ...103 Installing the Hard Disk Drive...106...
Page 4 Bluetooth Technology ...134 Optical Discs ...138 Display ...142 Printing ...144 Microphone ...145 Mouse ...146 Speakers ...147 Keyboard...149 Floppy Disks ...150 PC Cards ...151 Audio/Video...153 Memory Stick Media ...154 Peripherals ...155 Support Options ...156 Sony Support Information ...156 Program Support Information...158...
Page 5: Before Use
Your documentation includes printed information and user guides to read on your VAIO computer. Printed Documentation Welcome mat — Contains an overview of connections, setting up information, etc. Safety Information — Contains safety guidelines and owner information. ® computer, and welcome to the on-screen User Guide. Sony has Before Use...
Page 6 Specifications — The online Specifications describe the hardware and software configuration of your VAIO computer. To view the online Specifications: Connect to the Internet. Go to the Sony online support Web site at: http://esupport.sony.com/EN/VAIO/ http://www.sony.ca/support for customers in Canada, http://esupport.sony.com/ES/VAIO/...
Page 7 RAID Guide (Selected models only) — Provides an overview of RAID systems and the various RAID levels (or types) that can be configured with your VAIO computer. It lists detailed procedures for using the RAID Recovery program to configure the hard disk drives, change your computer's RAID array, or to remove the RAID configuration. Additional procedures are also provided for using the VAIO Recovery utility and the Intel Storage Utility programs.
Page 8: Help And Support
VAIO Media Setup and Windows Network and Sharing, and access to wireless tutorials. Security Keep your data safe and your computer running efficiently with updates and maintenance programs from Microsoft and Sony. VAIO Sites Contains links to other Internet sites you might find interesting and useful.
Page 9: Ergonomic Considerations
Ergonomic Considerations Whenever possible, you should attempt to take account of the following ergonomic considerations: Ventilation – Leave at least 6 inches (15 cm) of space on the back sides of your computer to enable proper ventilation. Position of your computer – Place the display directly in front of you (1). Keep your forearms horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard, pointing device, or external mouse.
Page 10 Before Use Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning far backwards.
Page 11: Getting Started
Getting Started This section describes how to get started using your VAIO computer. Before starting your computer for the first time, do not connect any other hardware that did not originally come with your computer. Make sure to start up your computer with only the supplied accessories connected and set up your system. Upon completion, connect one device (for example, a printer, an external hard disk drive, a scanner, and so on) at a time, following the manufacturers' instructions.
Page 12: Getting To Know Your Computer
Getting to Know Your Computer Take a moment to identify the controls and ports shown on the following pages. Your computer may not be equipped with all of the hardware features described in this section. The location of the controls, ports, and jacks may vary from the illustrations shown below, depending on the model you purchased.
Page 13 Access unit Hard disk/Optical disc drive indicator (page 19) Power button/Power indicator (page 19) Pressing this button will automatically turn on the main unit as well. Bluetooth indicator (page 19) Left front panel Flip this panel down to access slots, ports, and jacks. Right front panel Flip this panel down to access optical disc drives.
Page 14 SM/xD-Picture Card slot (page 54) ® CF (CompactFlash ) memory card slot Media Access indicator (page 19) Memory Stick PRO/Duo media slot (page 49) SD memory card slot (page 54) DVD-ROM disc drive (page 36) DVD-ROM disc drive eject button (page 36) Blu-ray Disc drive (page 36)
Page 15: Main Unit
Getting Started Back Main unit...
Page 16 Line In jack WOOFER/CENTER jack REAR jack Network (Ethernet) port (page 76) i.LINK (IEEE 1394) S400 port (6 pins) TO ACCESS UNIT port (page 23) Modem port (page 29) AC In port (page 32) DVI-D port (page 24) DVI-I port (page 24) S Video/Video Out port (page 26)
Page 17 Access unit Bluetooth antenna cover There is a Bluetooth antenna behind this cover. Hi-Speed USB (USB 2.0) ports (page 70) PC Card slot (page 46) PC Card release button (page 48) TO MAIN UNIT port (page 23) Supports high-/full-/low- speeds. Getting Started...
Page 18 Keyboard Function keys Perform certain tasks. The task associated with each function key varies among software applications. Muting button Turns the volume on and off. Volume control Turn this control clockwise to increase (+) or counterclockwise to decrease (-) the volume. Standby button Places the computer into Sleep mode for power consumption.
Page 19: About The Indicator Lights
About the Indicator Lights Your computer is equipped with the following indicator lights. Indicator Functions Power 1 The indication behavior varies depending on the state of your computer unit: (Both main and access units) Green lit: the unit is on. Orange lit: the unit is in Sleep mode.
Page 20: Setting Up Your Computer
Getting Started Setting Up Your Computer Your computer may not be equipped with all of the hardware features described in this section. The location of the controls, ports, and jacks may vary from the illustrations shown below, depending on the model you purchased. See the online Specifications for your computer's specific hardware configuration.
Page 21 Getting Started To place the main unit in the upright position The main unit comes with the four screw-type feet (1) on its bottom surface. Remove and screw them into the holes on the left side surface of the unit before placing the unit in the upright position. Use the supplied seals to cover the screw holes on the bottom when you use the main unit in the upright position.
Page 22 Getting Started To place the access unit in the upright position The access unit comes with a designated stand (1) for upright placement. Use this stand to place the unit in the upright position as illustrated below.
Page 23 Getting Started Connecting the Main and Access Units A designated connection cable is supplied with your computer for connection between the main and access units. Plug one end of the cable to the TO ACCESS UNIT port (1) on the back of the main unit and the other end to the TO MAIN UNIT port (2) on the back of the access unit.
Page 24: Connecting A Display
Connecting a Display Connect a display (not supplied) to your computer. When connecting it, see the manual that came with your display as well. To connect a display (monitor) If you want to connect a DVI monitor, plug its cable into the DVI-D (1) or DVI-I (2) port on the back of the main unit. If you want to connect a VGA monitor, use a video adapter device (not supplied) to connect its cable to the DVI-I port (2).
Page 25 Getting Started Your computer is compliant with the HDCP standard and capable of encrypting the transmission channel of digital video signals for the purpose of copyright protection, which enables you to play and view a wide variety of copyright protected, high-quality contents. Note that you need to connect an HDCP-compliant monitor to your computer to view the copyright protected contents.
Page 26 To connect a display (TV) Plug one end of an S Video cable (1) (not supplied) into the S Video/Video Out (2) port on the back of the main unit and the other end to the S Video input port on your TV (3). You will hear audio from the speakers connected to your computer, not from the TV.
Page 27: Connecting The Keyboard And Mouse
Connecting the Keyboard and Mouse A PS/2 keyboard and a USB mouse are supplied with your computer. To connect the keyboard and mouse Plug the keyboard cable (1) into the keyboard port (2) on the back of the main unit. Plug the mouse cable (3) into one of the USB ports (4) on the back of the access unit.
Page 28 Getting Started Be sure not to connect the mouse to any USB port on the main unit. The mouse will not be functional.
Page 29: Connecting The Telephone And Modem
Connecting the Telephone and Modem The main unit is equipped with a single modem port to connect the internal modem with a telephone wall jack. To use the wall jack for both telephone and modem lines, purchase an additional RJ-11 phone cable and a "1-to-2" port adapter device (splitter).
Page 30 Getting Started The main unit has a protective sticker covering the network (Ethernet) port located on its back. Connect 10BASE-T, 100BASE-TX, or 1000BASE- T cable to the network (Ethernet) port. Using an incorrect cable, such as a phone cable, may result in an electric current overload that can cause a malfunction, excessive heat, or fire in the network (Ethernet) port.
Page 31: Connecting Speaker Systems
Connecting Speaker Systems Note that speaker configuration varies, depending on the speaker components in use. To set up the speakers with the computer Match the color of the mini stereo plugs (from the speaker system) to the color of the speaker jacks on the back of the main unit.
Page 32: Connecting The Power Cord
Connecting the Power Cord Use only the supplied power cord for your computer. To connect the power cord Insert the power cord into the AC In port (1) on the back of the main unit. Insert each of the power cord plugs from the display and the main unit into a grounded AC wall outlet, surge protector, or Universal Power Supply (UPS) (2).
Page 33 Getting Started To disconnect your computer completely from AC power, unplug the power cord. Make sure that the AC outlets are easily accessible.
Page 34: Shutting Down Your Computer Safely
Shutting Down Your Computer Safely To avoid losing unsaved data, be sure to shut down your computer properly, as described below. To shut down your computer Turn off any peripherals connected to the computer. Click Start, the arrow next to the Lock button, and Shut Down. Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off automatically.
Page 35: Using Your Vaio Computer
Using Your VAIO Computer This section describes how to get the most out of using your VAIO computer. Using the Optical Disc Drive (page 36) Using PC Cards (page 46) Using the Memory Stick Media Using Other Memory Cards (page 54) Using the Jog Controller (page 58) Using the Internet...
Page 36: Using The Optical Disc Drive
Using the Optical Disc Drive The access unit of your computer is equipped with two optical disc drives: the DVD-ROM drive on the left and the Blu-ray Disc drive on the right. To insert a disc Turn on the computer. Flip down the right front panel of the access unit.
Page 37 Using Your VAIO Computer Close the tray by pushing it in gently. Do not remove the optical disc when your computer is in Sleep mode. Doing so may cause the computer to malfunction. Before removing the optical disc, make sure that the optical disc drive indicator light is off.
Page 38 Reading and Writing Optical Discs Your computer plays and records CDs, DVDs, or Blu-ray Discs, depending on the model you purchased. Check your specifications for the type of optical disc drive installed on your model. Use the table below to see which types of media your optical disc drive supports.
Page 39 Due to the multiple formats of discs now available, when buying pre-recorded or blank discs for use with a VAIO computer, be sure to read the notices on the disc packaging carefully to check both playback and recording compatibility with your computer's optical disc drives. Sony does NOT guarantee the compatibility of VAIO CD drives with discs that are not compliant with the official "CD"...
Page 40 Using Your VAIO Computer 8cm disc writing is not supported. Playing an 8cm disc with an 8cm disc adapter is not supported. To play 8cm discs, use the access unit in the flat position. To play copyright protected Blu-ray Discs continually, you need to update the AACS key. Note that the AACS key update requires Internet access. As with other optical media devices, circumstances may limit compatibility or prevent Blu-ray Disc playback.
Page 41 Using Your VAIO Computer Notes on writing data to a disc Use only Sony Value-added software to write data to a disc. (e.g. Click to DVD) Other software programs may not be fully compatible and errors may result. To make data on a disc readable on the optical disc drive, you need to close the session before you eject it. To complete this process, follow the instructions included with your software.
Page 42 Notes on playing discs To achieve optimum performance when playing DVDs, you should follow these recommendations. Close all open applications before playing a DVD movie. Some CD players and computer's optical disc drives may not be able to play audio CDs created with the CD-R or CD-RW disc media.
Page 43 Using Your VAIO Computer When you are playing a DVD (video or audio) and you want to remove a USB device, such as USB-compatible speakers, make sure you stop the DVD first. Removing a USB-compatible device during DVD (video or audio) playback may cause a malfunction.
Page 44: Playing Cds
Playing CDs To play an audio CD Insert a disc into the optical disc drive. If nothing appears on the desktop, then click Start, All Programs, and the desired CD software to play the CD. If the Audio CD window appears, click to select an option. Copying Files to CDs To copy files to a disc Do not strike or shake your computer while writing data to a disc.
Page 45: Playing Dvds
Playing DVDs To play a DVD Close all running software applications. Insert a DVD into the optical disc drive. If nothing appears on the desktop, then click Start, All Programs, and the desired DVD software to play the DVD. For instructions on how to use the software, see the help file on your DVD software. Copying Files to DVDs To copy files to a disc Insert a disc into the optical disc drive.
Page 46: Using Pc Cards
Using PC Cards PC Cards allow you to connect portable external devices to your computer. Inserting a PC Card Some PC Cards or their functions may not be compatible with your computer. You do not need to shut down your computer before inserting or removing a PC Card. To insert a PC Card With the front label facing upward, insert the PC Card into the PC Card slot on the back of the access unit.
Page 47 Using Your VAIO Computer Some devices may not function properly if you continually switch to Normal mode from Sleep mode. For some PC Cards, if you alternate between Normal mode and Sleep mode while the card is inserted, you may find that a device connected to your system is not recognized. Restart your system to correct the problem.
Page 48: Removing A Pc Card
Removing a PC Card Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not work properly. To remove a PC Card To remove a PC Card when your computer is off, skip steps 1 to 7. Double-click the Safely Remove Hardware icon on the taskbar.
Page 49: Using The Memory Stick Media
For the latest information about the Memory Stick media, visit the Memory Stick Web site at http://www.memorystick.com/en/. Your computer has been tested and found compatible with the Sony branded Memory Stick media with capacity of up to 4 GB that are available as of September 2006.
Page 50 Inserting a Memory Stick Media To insert a Memory Stick media Flip down the left front panel of the access unit. Locate the Memory Stick PRO/Duo media slot Hold the Memory Stick media with the arrow facing upward and pointing toward the Memory Stick PRO/Duo media slot. Carefully slide the Memory Stick media into the slot until it clicks into place.
Page 51 To view the contents of the Memory Stick media Click Start and Computer to open the Computer window. Double-click the Memory Stick media icon to view the list of data files saved in the Memory Stick media. To format a Memory Stick media The Memory Stick media has been formatted in the factory default setting and is ready for use.
Page 52 At the confirmation prompt, click OK. The formatting process starts. It may take time to format the Memory Stick media depending on the media. Once completed, click OK. Click Close. Using Your VAIO Computer...
Page 53 Removing a Memory Stick Media To remove a Memory Stick media Flip down the left front panel of the access unit. Check that the Media Access indicator light is off. Push the Memory Stick media in toward the computer. The Memory Stick media ejects. Pull the Memory Stick media out of the slot.
Page 54: Using Other Memory Cards
CF (CompactFlash) memory card slot CompactFlash Microdrive SD memory card slot Secure Digital (SD) MultiMediaCard (MMC) SM/xD-Picture Card slot SmartMedia xD-Picture Card For the latest information on compatible memory cards, visit the Sony online support Web site regularly. Using Your VAIO Computer...
Page 55 Using Your VAIO Computer Always insert the correct memory card into the appropriate memory card slot. SD memory cards with capacity of over 2 GB, such as SD High Capacity (SDHC) memory cards, are not supported. Do not attempt to insert a different memory card or memory card adapter into a different memory card slot. An incompatible memory card or adapter may be difficult to remove from the wrong slot and can cause damage to the access unit.
Page 56: Inserting A Memory Card
Inserting a Memory Card To insert a memory card Flip down the left front panel of the access unit. Do not use force to open the panel. Locate the appropriate slot for the memory card you want to use. Carefully slide the memory card into the slot until it clicks into place. Do not force the card into the slot.
Page 57: Removing A Memory Card
Removing a Memory Card Do not remove a memory card while the To remove a memory card Flip down the left front panel of the access unit. Check that the Media Access indicator light is off. Firmly grasp the extended part of the memory card. Carefully pull it out of the slot.
Page 58: Using The Jog Controller
Using the Jog Controller The jog controller supplied with your computer comes in handy when you edit or play videos, as application-specific tasks are automatically assigned to the jog controller buttons. See the help file on the VAIO USB Jog Utility software for more information.
Page 59 Connecting the Jog Controller To connect the jog controller Choose the USB port (1) you prefer to use on the front of the main or access unit. Plug the USB cable (2) into the USB port. The jog controller icon appears on the taskbar and you can now use your jog controller (3). Using Your VAIO Computer...
Page 60: Using The Internet
Using the Internet Setting Up a Dial-up Internet Connection Before you can connect to the Internet, you need to connect your computer to a telephone line with a telephone cable (not supplied). Once you have set up your telephone cable connection, you're ready to connect to the Internet. For details of telephone cable connections, see Connecting the Telephone and Modem To set up a dial-up connection to the Internet Click Start and Control Panel...
Page 61: Using The Bluetooth Functionality
Using the Bluetooth Functionality You can establish wireless communication between your computer and other Bluetooth devices such as another computer or a mobile phone. You can transfer data between these devices without cables and up to 33 feet (10 meters) range in open space.
Page 62 Notes on using the Bluetooth functionality The data transfer rate varies, depending on the following conditions: Obstacles, such as walls, located between devices Distance between devices Material used in walls Proximity to microwaves and cordless telephones Radio frequency interference and other environmental conditions Device configuration Type of software application Type of operating system...
Page 63 Using Your VAIO Computer The Bluetooth functionality may not work depending on the third party devices or the software version used by third party companies. As general characteristics of Bluetooth technology, connecting multiple Bluetooth devices to your computer may cause bandwidth congestion, resulting in poor performance of the devices.
Page 64 Bluetooth Security The Bluetooth wireless technology has an authentication function, which allows you to determine with whom you choose to communicate. With the authentication function, you can avoid any anonymous Bluetooth device to access your computer. The first time two Bluetooth devices communicate, a common passkey (a password required for authentication) should be determined for both devices to be registered.
Page 65: Communicating With Another Bluetooth Device
Using Your VAIO Computer Communicating with Another Bluetooth Device You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a mouse, or a digital camera without the use of any cables.
Page 66 To communicate with another Bluetooth device To communicate with another Bluetooth device, you need first to set up the Bluetooth functionality. For setting up and using the Bluetooth functionality, see the help file on the Bluetooth utility software. To see the help file Right-click the Bluetooth icon Stopping the Bluetooth Connection Double-click...
Page 67: Using The Bluetooth Headset
Using the Bluetooth Headset The Bluetooth headset (not supplied) will come in handy during a video conference over the Internet using instant messaging software. For details on using the Bluetooth headset, see the manual that came with your Bluetooth headset. To connect the headset with your computer Press and hold the headset power button for at least five seconds to turn on the Bluetooth headset.
Page 68 To disconnect the headset from your computer Right-click the Bluetooth icon The Bluetooth Settings window appears. Right-click the headset icon and select Disconnect from the menu. Click Yes. on the taskbar and select Bluetooth Settings from the menu. Using Your VAIO Computer...
Page 69: Using Peripheral Devices
Using Peripheral Devices You can add functionality to your VAIO computer by using the various ports on the computer. Connecting a Universal Serial Bus (USB) Device Connecting a Printer (page 72) Connecting an i.LINK Device (page 74) Connecting to a Network (LAN) (page 70) (page 76) Using Peripheral Devices...
Page 70: Connecting A Universal Serial Bus (Usb) Device
Connecting a Universal Serial Bus (USB) Device You need to flip down the left front panel to access the USB ports on the front of the access unit. Connecting a USB Floppy Disk Drive You can purchase a USB floppy disk drive and connect it to your computer. To connect a USB floppy disk drive Choose the USB port (1) you prefer to use.
Page 71: Disconnecting A Usb Floppy Disk Drive
Disconnecting a USB floppy disk drive You can disconnect a USB floppy disk drive when your computer is on or off. Disconnecting the drive when the computer is in Sleep mode may cause the computer to malfunction. If the computer is off, you can unplug the USB cable directly from the computer. To disconnect a USB floppy disk drive Close all programs accessing the floppy disk drive.
Page 72: Connecting A Printer
Connecting a Printer You can connect a Windows-compatible printer to your computer to print documents. Connecting a Printer Using the USB Port You can connect a USB printer compatible with your version of Windows to the computer. You need to flip down the left front panel to access the USB ports on the front of the access unit. To connect a printer using the USB port Plug the power cord (1) of your printer into an AC outlet.
Page 73: Connecting A Printer Using The Printer Port
Connecting a Printer Using the Printer Port To connect a printer using the printer port Plug the power cord (1) of your printer into an AC outlet. Plug the printer cable (2) supplied with your printer into the printer port (3) Before connecting the printer, turn off your computer and the printer.
Page 74: Connecting An I.link Device
Connecting an i.LINK Device Notes on connecting i.LINK devices Your computer is equipped with an i.LINK port, which you can use to connect to an i.LINK device such as a digital video camcorder or to connect two VAIO computers in order to copy, delete or edit files. The i.LINK port on your computer does not supply power to external devices generally powered by i.LINK ports.
Page 75: Connecting A Digital Video Camcorder
On Sony digital video cameras, ports labeled DV Out, DV In/Out, or i.LINK are i.LINK-compatible. The Sony digital video camcorder shown here is an example; your digital video camcorder may need to be connected differently. You cannot access the pictures stored on a Memory Stick media when using an i.LINK connection.
Page 76: Connecting To A Network (Lan)
Connecting to a Network (LAN) You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T-type networks with an Ethernet network cable. Connect one end of a network cable (not supplied) to the network (Ethernet) port on the back of the main unit and the other end to your network.
Page 77 Using Peripheral Devices Telephone lines cannot be connected to the network (LAN) connector on your computer. If the network (LAN) connector is connected to the telephone lines mentioned below, high electric current to the connector may cause damage, overheating, or fire. - Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone) - Public telephone subscriber line - PBX (private branch exchange)
Page 78: Customizing Your Vaio Computer
Customizing Your VAIO Computer This section briefly describes how to change the main settings of your VAIO computer. Among other things, you will learn how to use and customize the look of your Sony software and utilities, etc. Setting the Password...
Page 79: Setting The Password
Setting the Password Use one of the BIOS functions to set the password. Once you have set the password, you will have to enter the password after the VAIO logo appears to start your computer. The power-on password will allow you to protect the computer from unauthorized access. Adding the Power-on Password The power-on password is provided to protect your computer from unauthorized access.
Page 80 To add the power-on password Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. Press the <...
Page 81: Changing/Removing The Power-On Password
Changing/Removing the Power-on Password To change or remove the power-on password Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears.
Page 82: Setting Up Your Computer With Vaio Central
Setting Up Your Computer with VAIO Central The VAIO Central utility allows you to consult system information and specify preferences for system behavior. To use VAIO Central Click Start, All Programs, and VAIO Central. The VAIO Central window appears. Click the System Information tab. Select the desired control item and change the settings.
Page 83: Using The Power Saving Modes
Customizing Your VAIO Computer Using the Power Saving Modes In addition to the normal operating mode, which allows you to turn off specific devices, your computer has a distinct power saving mode called Sleep mode. Using Normal Mode This is the normal state of the computer when it is in use. To save power while not working, you can turn off a specific device such as the connected display or the hard disk.
Page 84: Using Sleep Mode
Using Sleep Mode Sleep mode temporarily suspends the entire system operations for lower power consumption. The orange power light is on in this mode. To activate Sleep mode Click Start, the arrow next to the Lock button, and Sleep. Alternatively, you can press the standby button on the keyboard to put your computer in Sleep mode. To return to Normal mode Press the power button on your computer or the standby button on the keyboard.
Page 85: Upgrading Your Vaio Computer
For the type of components available for upgrading and the amount of memory installed on your model, see the online Specifications. For assistance, contact an authorized Sony Service Center. To find the nearest center or agent, see Sony Support Information (page 156) or visit the Sony online support Web site.
Page 86: Before Upgrading Your Computer
Before Upgrading Your Computer The upgrading procedures described in this section assume that you are familiar with the general terminology associated with personal computers, safety practices, required regulatory compliances, and the modification of electronic equipment. Disconnect your computer from its power source and from telecommunications links, networks, or modems before you follow any procedures in this section.
Page 87: Removing And Replacing Computer Panels
Removing and Replacing Computer Panels To access memory modules, add-on cards, and hard disks inside your computer, you need to remove and replace the top or front panel of the main unit beforehand and afterward. If you remove any panel immediately after you shut down your computer, the internal components may be too hot to touch. Wait about one hour to let the components cool down before you attempt to remove the panel.
Page 88 To replace the top panel Place the top panel on the main unit and slide it toward the front. Tighten the two screws on the back of the main unit to secure the panel. Upgrading Your VAIO Computer...
Page 89 Removing and Replacing the Main Unit Front Panel To remove the front panel Shut down your computer and turn off all peripheral devices, such as a printer. Unplug the main unit and disconnect all peripheral devices, including the access unit. Place the main unit in the flat position.
Page 90 Slide and hold the latch (2) in the direction of the arrow (3) and remove the plastic HDD cover (4). Pull the metal HDD shield (5) toward you to take it off. Upgrading Your VAIO Computer...
Page 91 To replace the front panel Push in the metal HDD shield (1). Insert the tabs (2) on the right edge of the plastic HDD cover underneath the chassis frame and push in the left end of the cover. Upgrading Your VAIO Computer...
Page 92 Upgrading Your VAIO Computer Push in the left tabs (3) of the front panel into the slits on the chassis frame first and then the right tabs (4) into the right slits.
Page 93: Adding And Removing Memory
Adding and Removing Memory If you want to expand the functionality of your computer, you can increase the memory by installing optional memory modules. Before you upgrade your computer's memory, read the notes and procedures in this section. The number of available slots depends on your computer's hardware configuration.
Page 94 Use the special bag delivered with the memory module or wrap the module in aluminum foil to protect it from ESD. Introducing any liquids, foreign substances, or objects into the memory module slots or other internal components of your computer will result in damage to the computer and any repair costs will not be covered by the warranty. Do not place the memory module in a location subject to: Heat sources such as radiators or air ducts Direct sunlight...
Page 95: Removing And Installing A Memory Module
Removing and Installing a Memory Module To change or add a memory module Remove the top panel of the main unit. See Removing and Replacing the Main Unit Top Panel Remove the two screws from the chassis brace (1) and take out the brace. Touch a metal object (such as the chassis frame) to discharge static electricity.
Page 96 Locate the memory module(s) you wish to remove. Push down on the latches (2), located on either side of the module, to gently eject it from the slot. Grasp the memory module by the sides and remove from the main unit. Store the module in a static-free bag. Remove the memory module from its anti-static package, handling it by the edges.
Page 97 Firmly insert the lower edge of the module (4) into the slot by pressing down evenly against the module's upper corners. 10 The side latches (5) snap into position, holding the memory module in place. To avoid damaging a memory module or the memory module slot, move the side latches slightly outward to relieve pressure. 11 Replace the chassis brace and secure it with the screws.
Page 98: Viewing The Amount Of Memory
Viewing the Amount of Memory To view the amount of memory Turn on the computer. Click Start, All Programs, and VAIO Central. The VAIO Central window appears. Click the System Information tab. Double-click the System Information folder. Double-click the System Information icon. You can view the amount of system memory.
Page 99: Installing An Add-On Card
Upgrading Your VAIO Computer Installing an Add-on Card The main unit of your computer has two open expansion slots: one PCI compliant slot (PCI slot 1) and one PCI Express x4 compliant slot (PCI slot 2). To PCI slot 2, you can install a PCI Express x1 or x2 compliant card as well as a PCI Express x4 compliant card.
Page 100 Upgrading Your VAIO Computer Observe the proper safety precautions when you install an add-on card to your computer. See Before Upgrading Your Computer (page 86). The entire repair cost will be charged if there is a failure or an accident arising from installation of an add-on card by yourself. Make sure you unplug the main unit and peripheral devices, including the access unit, from the power sources and allow the main unit to cool down before installing or removing an add-on card.
Page 101 To install an add-on card Remove the top panel of the main unit. See Removing and Replacing the Main Unit Top Panel Touch a metal object (such as the chassis frame) to discharge static electricity. Locate an available expansion slot. Remove the slot cover's screw, and then remove the slot cover. Be careful not to damage the circuit board and cables inside.
Page 102 Insert the add-on card into the expansion slot and secure it with the screw from the expansion slot cover. Be careful not to touch other internal components when inserting the card as it may cause a failure. Replace the top panel. See Removing and Replacing the Main Unit Top Panel Upgrading Your VAIO Computer (page 87)
Page 103: Replacing The Lithium Battery
Replacing the Lithium Battery The lithium battery starts to weaken after several years and the system settings, such as the date and time stored in CMOS RAM, may become inaccurate. Replace the lithium battery when this occurs. There is danger of the battery exploding if it is replaced incorrectly. Replace the battery only with a CR2032-type lithium battery. To replace the lithium battery Write down any changes you may have made to the settings in the BIOS Setup utility.
Page 104 Dispose of the lithium battery properly. In some areas, the disposal of lithium batteries in household or business trash may be prohibited. You can return your unwanted lithium batteries to your nearest Sony Service Center or Factory Service Center. To find the nearest center or agent, see Sony...
Page 105 Resetting the Computer's Date and Time To reset the computer's date and time Click the time readout displayed on the taskbar. The window appears showing the current date and time. Click Change date and time settings. The Date and Time window appears. On the Date and Time tab, change the settings as desired.
Page 106: Installing The Hard Disk Drive
Hard disk installation requires great care. Improper installation or removal will cause a malfunction of your computer. If you need assistance to install a hard disk, contact an authorized Sony Service Center. To find the nearest center or agent, see Sony Support...
Page 107 Upgrading Your VAIO Computer Make sure you unplug the main unit and peripheral devices, including the access unit, from the power sources before installing or removing a hard disk. Installing or removing a hard disk while the main unit is plugged to its power source may cause damage to the both units and the peripheral devices as well as the hard disk.
Page 108: Installing An Additional Hard Disk Drive
Installing an Additional Hard Disk Drive You can install up to four SATA hard disk drives to the internal hard disk drive bay. To install an additional hard disk drive Remove the front panel of the main unit. See Removing and Replacing the Main Unit Front Panel Push the button (1) to release the hard disk drive holder lever (2).
Page 109 Grasp the lever and pull out the holder (3) from the hard disk drive bay and set it aside. Unscrew the four screws from the holder cover. Upgrading Your VAIO Computer...
Page 110 Remove the holder cover and insert a new hard disk drive. Replace the holder cover and secure it with the screws. Upgrading Your VAIO Computer...
Page 111 Slide the hard disk drive holder into the hard disk drive bay and push in the holder lever into place. Connect the power connectors to the preinstalled and new hard disk drives. Upgrading Your VAIO Computer...
Page 112 Use of a commercially available SATA cable with the straight-head connector may damage the connector on the hard disk drive by being pulled out when you replace the drive holder. We recommend you use Sony SATA cables exclusively designed for your computer.
Page 113: Identifying The Additional Hard Disk Space
Identifying the Additional Hard Disk Space When you initialize the new hard disk, it must be configured as an extended partition in Windows NT file system (NTFS) format. To identify the additional hard disk space Log on to Windows as a user with administrator rights. Click Start and right-click Computer.
Page 114: Precautions
Precautions This section describes safety guidelines and precautions to help you protect your VAIO computer from potential damage. On Using the Power Source (page 115) On Handling Your Computer (page 116) On Handling Floppy Disks (page 118) On Handling Discs (page 119) On Using Headphones (page 120)
Page 115: On Using The Power Source
Unplug your computer from the AC outlet if you are not planning to use the computer for a long period of time. Make sure that the AC outlet is easily accessible. Use the power cord supplied with your computer or genuine Sony products. Do not use any other power cord as it may cause a malfunction.
Page 116: On Handling Your Computer
On Handling Your Computer Clean the cabinet with a soft cloth, which is dry or lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer.
Page 117 If your computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In this case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and contact an authorized Sony Service Center. To find the nearest center or agent, see Sony Support Information (page 156) visit the Sony online support Web site.
Page 118: On Handling Floppy Disks
Precautions On Handling Floppy Disks Do not open the shutter manually or touch the surface of the floppy disk. Keep floppy disks away from magnets. Keep floppy disks away from direct sunlight and other sources of heat. Keep floppy disks away from any liquid. Do not let them get wet. When you are not using your floppy disk, always remove it from the floppy disk drive and use a storage case.
Page 119: On Handling Discs
Precautions On Handling Discs Do not touch the surface of the disc. Do not drop or bend the disc. Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edges and central hole, as shown below: Proper care of the disc is essential to its continuous reliability.
Page 120: On Using Headphones
On Using Headphones Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use. On Handling Memory Stick Media Do not use the media in a location subject to static electricity or electrical noise.
Page 121: On Handling The Hard Disk
On Handling the Hard Disk The hard disk has a high storage density and reads or writes data in a short time. However, it can be easily damaged by mechanical vibration, shock, or dust. Although the hard disk has the internal safety device to prevent losing data due to mechanical vibration, shock or dust, you should be careful when handling your computer.
Page 122: Troubleshooting
Troubleshooting This section describes how to solve common problems you might encounter when using your VAIO computer. Many problems have simple solutions. Try these suggestions before visiting the Sony online support Web site at: http://esupport.sony.com/EN/VAIO/ for customers in USA, http://www.sony.ca/support for customers in Canada, http://esupport.sony.com/ES/VAIO/...
Page 123: Computer
Computer What should I do if my computer does not start? Make sure your computer is securely plugged into a power source and turned on. Make sure the power indicator shows the power is on. Make sure the floppy disk drive (if applicable) is empty. If your computer is plugged into a power strip or an uninterruptible power supply (UPS), make sure the power strip or UPS is plugged into a power source and turned on.
Page 124 The message Exit Saving Changes? (Y/N) appears. Press the Y key. Your computer restarts. If this occurs frequently, contact an authorized Sony Service Center. To find the nearest center or agent, see Sony Support Information (page 156) or visit the Sony online support Web site.
Page 125 What should I do if the power indicator lights but my screen stays blank? Make sure the proper input for your display (TV, VGA, DVI-D monitor) is selected. Make sure your display (TV, VGA, DVI-D monitor) is turned on. If your display is still blank, follow these steps: Press the power button on your computer for more than four seconds to check that the power indicator goes out.
Page 126 Troubleshooting What should I do if my computer or software stops responding? If your computer stops responding while a software application is running, press the Alt+F4 keys to close the application window. If the Alt+F4 keys do not work, click Start, the arrow next to the Lock button, and Shut Down to turn off your computer. If your computer does not turn off, press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Shut Down.
Page 127: Why Doesn't My Computer Enter Sleep Mode
Why doesn't my computer enter Sleep mode? Your computer may become unstable if the operating mode is changed before the computer completely enters Sleep mode. To restore your computer to normal operating stability Close all open programs. Click Start, the arrow next to the Lock button, and Restart. If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart.
Page 128 What should I do if Windows does not start, showing a message, when I start my computer? Make sure the optical disc drives on the access unit of your computer do not contain a "non-bootable" disc. If a non-bootable disc is in either drive, follow these steps: Remove the disc.
Page 129 Press the Enter key. The Load Setup Defaults window appears. Select OK, and press the Enter key. 10 Select Exit (Save Changes), and press the Enter key. The Save configuration changes and exit now? window appears. 11 Select OK, and press the Enter key. Your computer restarts.
Page 130 What should I do if I cannot remember the BIOS password? If you have forgotten the BIOS password, contact an authorized Sony Service Center to reset it. A reset fee will be charged. To find the nearest center or agent, see Sony Support Information...
Page 131: System Security
System Security This section provides information about keeping your computer operating smoothly and protecting against potential threats to the computer's security. How can I protect my computer against security threats, such as viruses? The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against security threats, such as viruses, is to download and install the latest Windows updates regularly.
Page 132: Internet
Make sure the telephone cable is working. Plug the cable into an ordinary telephone and listen for a dial tone. Make sure that the telephone number the program is dialing is correct. Make sure the software you are using is compatible with your computer's modem. (All preinstalled Sony programs are compatible.) Follow these steps to check the settings: Click Start and Control Panel.
Page 133: Why Is My Modem Connection Slow
Why is my modem connection slow? Your computer is equipped with a V.92/ V.90 compatible modem. Many factors may influence modem connection speed, including telephone line noise or compatibility with telephone equipment, such as fax machines or other modems. If you think your modem is not connecting properly to other PC-based modems, fax machines, or your Internet Service Provider (ISP), do any of the following: Ask your telephone company to verify your telephone line is free of any line noise.
Page 134: Bluetooth Technology
Bluetooth Technology What should I do if other Bluetooth devices cannot discover my computer? Make sure both devices have the Bluetooth functionality enabled. If the Bluetooth indicator is off, activate the Bluetooth functionality. See Using the Bluetooth Functionality the detailed instructions. You cannot use the Bluetooth functionality when your computer is in a power saving mode.
Page 135 What should I do if other Bluetooth devices cannot connect to my computer? Make sure the other device is authenticated. Your computer may not allow connections from other devices. To enable Bluetooth device connections, follow these steps: Right-click the Bluetooth icon Select Options from the menu.
Page 136: Why Is My Bluetooth Connection Slow
Why is my Bluetooth connection slow? The data transfer speed depends on the obstacles and/or the distance between the two devices, on the radio wave quality, and on the operating system or the software in use. Move your computer and Bluetooth devices closer to each other. The 2.4 GHz radio frequency used by Bluetooth and wireless LAN devices is also used by other devices.
Page 137 Troubleshooting Can I use a device with Bluetooth technology on airplanes? With Bluetooth technology, your computer transmits a radio frequency of 2.4 GHz. Sensitive locations, such as hospitals and airplanes, may have restrictions on use of Bluetooth devices, due to radio interference. Check with facility staff to see if use of the Bluetooth functionality on the computer is permitted.
Page 138: Optical Discs
Optical Discs Why does my computer freeze when I try to read a disc? The disc that your computer is trying to read may be dirty or damaged. Follow these steps: Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer. Remove the disc from the optical disc drive.
Page 139 What should I do if I cannot play a disc properly on my computer? Make sure the disc is inserted into the optical disc drive with the label facing upward. Make sure the necessary program(s) is installed according to the manufacturer's instructions. If a disc is dirty or damaged, your computer will stop responding.
Page 140 Double-click the optical disc drive device to open a list of the optical disc drives of your computer. Double-click the desired drive. You can confirm the driver software by selecting the Driver tab, and clicking Driver Details. Click OK to close the window. Make sure an adhesive label is not affixed to a disc.
Page 141 What should I do if I cannot write data to CD media? Make sure you neither launch any software application nor allow any to launch automatically, not even a screen saver. Stop using the keyboard. If you are using a CD-R/RW disc with an adhesive label affixed, replace it with one with no affixed adhesive label. Using a disc with an affixed adhesive label could cause a write error or other damage.
Page 142: Display
Display Why did my screen go blank? Your display screen may go blank if your computer enters Sleep mode. If the computer is in Sleep mode, press the power button on the computer or the standby button on the keyboard to bring the computer back into Normal mode. See Using the Power Saving Modes (page 83) Make sure that both power cords of your computer and display are securely plugged into power sources.
Page 143: How Do I Run Windows Aero
How do I run Windows Aero? This Q & A entry applies to selected models only. To run Windows Aero, follow these steps: Click Start and Control Panel. Click Customize colors under Appearance and Personalization. Click Open classic appearance properties for more color options. The Appearance Settings window appears.
Page 144: Printing
Printing What should I do if I cannot print a document? Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and computer. Make sure your printer is compatible with the Windows operating system installed on your computer. You may need to install the printer driver software before you use your printer.
Page 145: Microphone
Microphone What should I do if my microphone does not work? If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the microphone jack on your computer. If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the microphone jack on your computer.
Page 146: Mouse
Mouse What should I do if my computer does not recognize my mouse? Make sure your mouse is securely plugged into the port. Restart your computer with your mouse connected. What should I do if the pointer does not move when I use my mouse? Make sure another mouse is not connected.
Page 147: Speakers
Speakers What should I do if my speakers do not work? Make sure your speakers are properly connected and the volume is turned up loud enough to hear sound. Make sure your speakers are designed for computer use. If your speakers have a muting button, set the button to off. The speaker volume may have been turned off.
Page 148 What should I do if I do not hear 5.1ch audio from my speakers? Follow these steps to check the speaker setup. Click Start and Control Panel. Click Hardware and Sound. Click Manage audio devices under Sound. On the Playback tab, select Speakers and click Configure. The Speaker Setup window appears.
Page 149: Keyboard
Keyboard What should I do if the keyboard configuration is wrong? The language layout of your keyboard is labeled on the packaging box. If you choose a different regional keyboard when you complete the Windows setup, the key configuration will be mismatched. To change the keyboard configuration, follow these steps: Click Start and Control Panel Click Clock, Language, and Region, and click Regional and Language Options.
Page 150: Floppy Disks
Floppy Disks Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is connected? Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps: Close all programs that are accessing the floppy disk drive.
Page 151: Pc Cards
See the manual that came with your PC Card for more information. You may need to install driver software if you are not using a Sony PC Card. If your PC Card, which worked normally before, does not work, you may need to install the most recent driver software.
Page 152 Why doesn't my computer recognize attached devices? For some PC Cards, if you alternate between Normal mode and Sleep mode while the card is inserted into the PC Card slot, your computer may not recognize the PC Card or the connected device. Restart the computer. Why can't I insert my PC Card? Make sure you are inserting the card correctly.
Page 153: Audio/Video
(page 74) i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The procedure to establish an i.LINK connection may vary, depending on a software application, an operating system, and a compatible i.LINK device. Not all products with an i.LINK connection can communicate with each other.
Page 154: Memory Stick Media
Use of recorded music requires permission from the copyright holders. Sony is not responsible for music files that cannot be recorded from a CD or downloaded from other sources. Can I copy images from a digital camera using Memory Stick media? Yes, and you can view video clips that you have recorded with Memory Stick media-compatible digital cameras.
Page 155: Peripherals
Peripherals What should I do if I cannot connect a USB device? If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital camera, check if the battery is charged. If you are using a printer, check if the power cable is connected properly to the AC outlet.
Page 156: Support Options
Sony Computing Support This service provides instant access to information on commonly encountered problems. Type a description of the problem and the Knowledge Database searches for the corresponding solutions online. You can visit the Sony online support Web site at: http://esupport.sony.com/EN/VAIO/ http://www.sony.ca/support for customers in Canada, http://esupport.sony.com/ES/VAIO/...
Page 157 Support Options VAIO Update When your computer is connected to the Internet, VAIO Update automatically notifies you when critical software and security information is posted on the support Web site. Click the VAIO Update notice to open the VAIO Support Web site and view the information.
Page 158: Program Support Information
Program Support Information Depending on the computer model and particular configuration you purchased, your computer may not include all of the software programs listed below. Contacts for Sony software products are listed below: For users in USA Web site http://esupport.sony.com/EN/VAIO/...
Page 159 ® America Online (Dial-Up) America Online, Inc. For users in USA and Canada Web site http://www.aol.com ® Music Now America Online, Inc. For users in USA and Canada Web site http://www.premiumservices.aol.com ® Explorer America Online, Inc. For users in USA and Canada Web site http://www.aol.com ®...
Page 160 ® Instant Messenger™ America Online, Inc. For users in USA and Canada Web site http://www.aim.com Ask Search Assistant IAC Search & Media, Inc. For contacts about the software, see Program Support Information Ask Toolbar IAC Search & Media, Inc. For contacts about the software, see Program Support Information ®...
Page 161 Click to DVD software Sony Electronics Inc. At the touch of a button, Click to DVD software allows you to automatically burn DVDs from a digital video (DV) device. Create DVDs by capturing video content straight from a DV device or by importing video from stored files — and you can also edit the video.
Page 162 ® Microsoft Office Basic Edition, Office Professional Edition, Office Small Business Edition Microsoft Corp. For users in USA and Canada Web site http://support.microsoft.com 60-Day Trial Version of Microsoft The Microsoft Office 60-Day Trial software included with this computer system is intended for evaluation purposes only. The software has been installed and you must activate the software before you can use it.
Page 163 ® PenPlus for VAIO Sony Electronics Inc. PenPlus for VAIO PC will allow you to write or draw directly on the screen with the stylus or create "sticky note" reminders. For contacts about the software, see Program Support Information (page 158).
Page 164 Protector Suite QL Sony Electronics Inc. Protector Suite QL Edition allows you to easily setup your fingerprint sensor that comes with your computer. Protector Suite QL supports fingerprint logon, fast user switching, file encryption, registering forms and more. For contacts about the software, see Program Support Information Quickbooks Free Starter Edition Intuit Inc.
Page 165 ® SonicStage software Sony Electronics Inc. The SonicStage jukebox software program gives you all the tools you need to manage music on your computer. SonicStage software supports high-quality digital audio storage, a sleek player skin design, and audio CD burning capability.
Page 166 For questions and technical assistance, please check the help and the readme files. ® VAIO Action Setup Sony Electronics Inc. VAIO Action Setup manages the settings for your computer's shortcut keys. For contacts about the software, see Program Support Information ®...
Page 167 ® VAIO Central Sony Electronics Inc. VAIO Central provides a central location that gathers resources to configure your VAIO computer and view your computer's configuration and specifications. For contacts about the software, see Program Support Information ® VAIO Diagnostic Sony Electronics Inc.
Page 168 For contacts about the software, see Program Support Information ® VAIO Security Center Sony Electronics Inc. Sony cares about your VAIO personal computer. The VAIO Security Center highlights some of the security features your machine includes. For contacts about the software, see Program Support Information ® VAIO Touch Launcher Sony Electronics Inc.
Page 169 Sony Electronics Inc. The Zoom Utility will allow you to magnify a portion of the screen. For contacts about the software, see Program Support Information ® computer up to date by regularly checking the Sony online support (page 158). (page 158).

Sony VAIO VGC-RM1 Series User Manual

Quick Links

User Guide

Related Manuals for Sony VAIO VGC-RM1 Series

Summary of Contents for Sony VAIO VGC-RM1 Series

Table of Contents