• The manufacturer assumes no liability or warranty for any consequences caused by tampering with the product or incorrect use by the operator. • Installation, electrical connection, set-up, operation and maintenance of the product must be carried out by qualified personnel authorised by the machine operator.
4 Functions and features The unit detects the hydrostatic pressure and converts it into an analogue output signal. The output signal changes in proportion with the level of the tank. Applications • Liquids. • Tanks, containers, wells, streaming water, drill holes, wastewater plants. Pressure Equipment Directive (PED): The units comply with the Pressure Equipment Directive and are designed and manufactured for group 2 fluids in accordance with the sound...
In wet environments there is the risk that water penetrates into the unit through the capillary tube and causes damage to it. In this case use the filter element or the splitter box with ventilation. The filter element and the splitter box are only allowed for use outside hazardous areas.
7 Maintenance, repair and disposal The unit has to be included in the recurrent pressure test of the tank. Only the manufacturer is allowed to repair the unit. After use dispose of the unit in an environmentally friendly way in accordance with the applicable national regulations.