For the list of authorized service centers please go to www.real-el.com. • Do not let liquid get inside the device, it can cause short circuit or electric shock.
• Mounting stabilizer location should be close to the wall outlet, considering the stabilizer power cord length. • Next, make a mounting fasteners (not included) to the wall, considering the wall mounting holes location on the stabilizer rear panel (see Fig. 2). • Then hang the stabilizer on fixing elements. Technical support: www.real-el.com...
• When the mains voltage exceeds the allowable rate (lower threshold is 140 V, upper threshold is 260 V) the red LED illuminates, the AVR disconnects the load automatically. Attention! It is recommended to switch off the AVR and every connected consumer device when the power supply is dropped. Technical support: www.real-el.com...
AVR tuns on automatically. 140 – 260 V. If none of the above methods can solve the problem, please seek professional advice at your nearest service center. Never attempt to repair the product yourself. Technical support: www.real-el.com...
Notes: • Technical specifications given in this table are supplemental information and cannot give occasion to claims. • Technical specifications and package contents are subject to change without notice due to the improvement of TM REAL-EL production. Technical support: www.real-el.com...
Page 8
STAB SLIM-300, STAB SLIM-500, STAB SLIM-1000, Models: STAB SLIM-2000 Manufacturer: ENEL GROUP OU, Katusepapi tn 6, Lasnamäe linnaosa, Tallinn, Harju maakond, 11412, Estonia. Made in China. ® Registered Trademark of ENEL GROUP OU. Estonia.